User manual
Table Of Contents
- Introduction
- Hardware description
- Software
- DELIB API reference
- Appendix
Hardware description |Seite 8
2. Hardware description
2.1. Introduction
The USB-OPTOIN-X-RELAIS-X modules provide relays with a maximum switching
voltage of 36V DC (max. 1A, 15 watts) and Opto-in inputs, which are suitable for
industrial applications for registration of status or even to count the changes of
state of the inputs.
Our USB modules have been developed for industrial applications for
measurement, control and regulation. The modules all feature a USB interface and
can therefore be connected to PC systems with USB bus. The USB bus has been
used successfully for many years in use and is characterized by its high flexibility.
As terminal block, user-friendly terminal strips with locking protection and ejection
mechanism are used. They allow quick replugging . The wire connection itself is
realised with a screwless connector system. A tool is included with each module.