NEWS 2014 English 03 / 2014
DEDO AND COMPANY My name is Dedo. I am a cameraman/Director of Photography. I’ve shot documentaries, commercials, art films, features and theatre plays in over forty countries. I am also a high - speed specialist (film and video). Today, dedolight is widely known and acclaimed for precision lighting instruments. I am very proud of my unique team at dedolight. No manufacturer in our field has as many experienced, recognized and practicing Directors of Photography as we do.
LED BREAKTHROUGH Digital cameras see LED light differently than tungsten/daylight sources. Additionally cameras interpret these light sources differently from each other. Color temperature meters are unable to see the full spectrum and therefore do not work for the evaluation of LED light. Samples are only taken in three or four places of the spectrum (narrow band filters).
Focusing LED lights present special challenges regarding color distribution. Specially developed LED light sources in combination with our patented double-aspheric technology (recognized by the Oscar committee for Technical Achievement) have allowed us to provide five different dedolight DLED focusing LED light fixtures. All deliver perfect light distribution, the widest focusing range in the industry and allow the use of our unique line of light shaping accessories.
INTRODUCING OUR COMPLETE RANGE OF FOCUSING DEDOLIGHT LED FIXTURES 5 DIFFERENT SIZES: They all share common properties. State - of - the - art light source with features exclusively developed by dedolight and highest dedocolor ® quality dedolight patented aspherical optics Providing astoundingly high efficiency Unprecedented focusing range (wider/tighter) dedolight clean beam concept. Controlled precision beam with no stray light outside and perfectly even light distribution within the beam DLED2.
LED focusing YOUR DREAM OUR FOCUSING Complete Range in 5 different sizes Patented aspherics2 dedolight Optics Unprecedented Focusing Astounding Light Efficiency DAYLIGHT complete range of 6
LED lights LED LIGHTS and systems for on-board, off-board, mobile, studio & special effects.
DLED2.1 LED SMALL, POWERFUL, VERSATILE DEDOLIGHT ® DLED2.1Y-D / -BI separate light head for use with ballasts (ballasts shown page 9) A DLED2.1YHSM-D/-BI As depicted above, but with hot shoe mount. Interchangeable mounting from stand fitting to hot shoe mount. Can be delivered as spare part upon request. DLED2.1-D Monocolor. Continuous dimming with no color shift, with integrated electronics an 16 mm (5/8") stand fitting. DLED2.1-BI DLED2-BS Same as image A, but in bicolor version.
DP2S Imager / projection attachment with adjustable blades DLBCA-V LiTH 95SI battery, 95 Wh V - Mount plate with belt clip or belt loop and D - tap output. DP1S Imager / projection attachment for Gobos and background effect filters THREE SIZES OF CONNECTING CABLE TO LIGHT HEAD (yoke versions) Note: LiTH 95Wh battery with integrated charger and V - Mount adapter can be used on a belt and also hung on the knob of a stand (loop). This device also serves to feed DLED4.
DLED2.1 TECHNICAL DATA 2,8" (71 mm) 5,51" (140 mm) 4,13" (105 mm) 142 mm (5,6") 4,37" (111 mm) FLOOD 5,87" (149 mm) 3,1" (79 mm) 5,87" (149 mm) DLED 2.0 Side view flood DLED2.1-D, DLED2.1-BI Distance 50° - 5° (1:7) Flood Medium Focus Control 3/4 turn on focus ring Power 25 W, 6 - 18 V DC Mounting 5/8" (16 mm) receptacle and 1 1/8" (28 mm) stud OR: optional with shoe mounting (e.g.: DLED2.1 HSM-BI) OR with yoke and separate power supply (e.g.: DLED2.
DLED4.1 LED LIGHT HEAD DEDOLIGHT ® ASPHERICS2 ® OPTICS DEDOLIGHT ® Dedo shows Steven Poster, ASC prototype of DLED4.0 light at IBC 2011 in Amsterdam. State - of - the - art LED dedocolor ® sources in daylight, tungsten and bicolor versions. Separate dimming control adjusts the intensity with no color change. Focuses like a true dedolight from wide 60° to extremely narrow 4° clean beam – no stray light. Lets you put the light exactly where you want it without causing any extra unwanted shadows.
DLED4.1 TECHNICAL DATA 4.29" (109 mm) Distance 60 - 4° (1:20) with optional aspheric wide - angle attachment: 85 - 54 ° One complete turn on focus ring Flood Medium Spot Power 40 W Mounting 5/8" (16 mm) receptacle and 1 1/8" (28 mm) stud Distance Operating Position Any Flood Tilt Control Permanent friction Medium Accessory Holder 3" (76 mm) diameter Safety Protection Class III, SELV, IP40 Cooling Passive (no fan) No UV radiation Weight 2.9 lb (1,300 g) Size 7.24" (184 mm) 3.
POWER OPTION FOR DLED4.1 DEDOLIGHT ® DLED4.1 POWER SUPPLY DT4.1 AC power supply for DLED4.1 tungsten and daylight light heads. DT4.1 Allows worldwide use from 90 - 264 V AC* 50/60 cycle plus continuous dimming. 2.83" (72 mm) The DT4.1-BI, same as above but with extra control for continuous change of color temperature from daylight to tungsten. Add suffix “-DMX” for above ballasts with DMX control DT4.1-DMX. 8.27" (210 mm) 1.96" (50 mm) The DT4.1-BAT-XLR / DT4.
NEW: DLED4/FELLONI KITS DLED4 3 LIGHT KIT - BICOLOR WITH SOFT CASE SPSLED3-BI-BAT 3 Light Kit - BICOLOR (BAT) - DC, battery operation only 3x DLED4.1-BI bicolor light head with 1x dedoflex mini soft box and accessories. 3x DT4.1-BI-BAT-AB battery power supplies 10,2-18 V DC, 3x LiTH 95SI batteries with integrated charger, 3x DST stands. Complete with DSC1/1-200 soft case SPSLED3-BI-B 3 Light Kit - BICOLOR (BASIC) - AC, mains operation only 3x DLED4.
DLED4/FELLONI (2x1) 3 LIGHT KIT - BICOLOR WTIH BACK PACK BPSLED2x1-BI-BAT 3 Light Kit - BICOLOR (BAT) - DC, battery operation only 2x DLED4.1-BI bicolor light head, 1x FELLONI BI50HO bicolor LED panel with FELLONI soft box, DP1.1 imager and accessories. 2x DT4.1-BI-BAT-AB battery power supplies 10,2-18 V DC, 3x LiTH 95SI batteries with integrated charger, 3x DST stands. Complete with DBPSLED backpack BPSLED2x1-BI-B 3 Light Kit - BICOLOR (BASIC) - AC, mains operation only 2x DLED4.
DLED4/FELLONI (2x2) 4 LIGHT KIT - BICOLOR WITH SOFT CASE SPSLED2x2-BI-BAT 4 Light Kit - BICOLOR (BAT) - DC, battery operation only 2x DLED4.1-BI bicolor light head, 2x FELLONI BI50HO bicolor LED panel with 2x FELLONI soft box, DP1.1 imager and accessories. 2x DT4.1-BI-BAT-AB battery power supplies 10,2-18V DC, 4x LiTH 95SI batteries with integrated charger. Complete with new soft case DSCLED2x2 SPSLED2x2-BI-B 4 Light Kit - BICOLOR (BASIC) - AC, mains operation only 2x DLED4.
DLED4 4 LIGHT KIT - BICOLOR WITH SOFT CASE SPSLED4-BI-B 4 Light Kit - BICOLOR (BASIC) - AC, mains operation only 4x DLED4.1-BI bicolor light head with 2x dedoflex mini soft box, DP1.1 imager and accessories. 4x DT4.1-BI mains power supplies 90-264V AC (please specify power plugs), 4x DST stands. Complete with DSC2/2-200 soft case SPSLED4-BI-M 4 Light Kit - BICOLOR (MASTER) - AC/DC, mains and battery operation 4x DLED4.1-BI bicolor light head with 2x dedoflex mini soft box, DP1.1 imager and accessories.
DLED9.1 DEDOLIGHT ® ASPHERIC2 ® OPTICS The exceptional dedolight DLED9.1 combines the unique dedolight Since all LED light sources double aspheric optical system with state - of - the - art dedocolor ® LED are extremely sensitive to light sources. This light head is available in daylight, tungsten and a heat, this light fixture includes tunable bicolor version.
DLED9.1 TECHNICAL DATA SPOT 11.73" (298 mm ) FLOOD 9.22" ( 234 mm ) 8.15" (207 mm ) PHOTOMETRICS: DLED9.1-D Daylight LED Light Head FOCUSING LIGHT HEAD: DLED9.1-D, DLED9.1-T Focus Range (Intensity Range) Focus Control 12.
POWER OPTION FOR DLED9.1 DEDOLIGHT ® DLED9.1 POWER SUPPLY DT9.1 AC power supply for DLED9.1 tungsten and daylight light heads. For bicolor light heads (DLED9.1-BI) a separate power supply is needed (DT9.1-BI). DT9.1 DT9.1-BI 2.83" (72 mm) Battery power supplies for DLED9.1-BI will be introduced shortly. Allows worldwide use from 90 - 264 V AC * 50/60 cycle plus continuous dimming. 10.35" (263 (316 mm)mm) 12.44" 1.97" Add suffix “-DMX” for above ballasts with DMX control DT9.
DLED12.1 DMX STUDIO EDITION The DLED12.1DMX is currently the largest in our range of focusing LED lights. All our other DLED lights work with passive cooling – no fan – no noise The extreme power of this light is compensated by a state of the art cooling system. Noise level of our cooling system is distincly lower than with other comparable lights. dedolight aspherics2 optics provide the expected huge focusing range, clean beam and smooth light distribution.
DLED12.1 DMX DATA DLED12.1-D-PO-DMX DLED12.1-D-PO-DMX 21.36" (542,63 mm) Pole-Operated Versions: 21.36" (542,63 mm) DLED12.1-D-DMX DLED12.1-T-DMX 0 12.73" (323,37 mm) FOCUSING LIGHT HEAD: PHOTOMETRICS: DLED12.1-D-DMX Daylight LED Light Head DLED12.1-D-DMX, DLED12.
LED ON BOARD-LIGHT THE DEDOLIGHT ® MINI-DLOB EW N N SIO R VE Smooth light distribution in all and every focusing position. Wide - angle flip - up diffuser for 70 ° angle, smoothly covers wide - angle zooms. Clean, sharp, single edge barn door shadow OR a very gentle light and shadow transition with the flip - up diffuser in place Converts from daylight to tungsten via flip - down filter Color rendition and color distribution is cleaner than comparable LED lights.
ACCESSORIES – MOUNTING (FOR LEDZILLA , IREDZILLA, FLUORESZILLA) ® DLBSA- HAND Shoe adapter with handle DLBSA- M 1/4“ male to mini shoe for Sony mini camcorder, use with DLBSA-T DLGA300 / DLGA200 Articulating arm, 200 mm. Square top, male shoe or 1/4“ male to camera DLBSA-TS Table shoe: 9.5 x 6.3 x 1.2 cm (3.7“ x 2.5“ x 0.
POWER SUPPLY (FOR LEDZILLA®, IREDZILLA, FLUORESZILLA) DLOBML-XLR DLB-NPF550 Coiled cable 65 cm - 1.30 m / 25 - 51“ with 4 - Pin XLR connector 7.2 V Li-Ion battery 14.8 Wh (2000 mAh) DLPS-12 Mains power supply (100 - 240 V) with 12 V DC output DLOBML-BC 7.2 V Canon battery shoe for BP - 9 DLOBML-BC2 DLB-NPF950 DLOBML-SWIT Cable 55 cm / 22“ with Ø 2.1 / 5.5 mm connector for Swit battery 7.2 V Li-Ion battery 43.2 Wh (6000 mAh) 7,2 V Canon battery shoe for BP 808/809/819 DLOBML-BP 7.
860/960 NM INFRARED LED ON-BOARD - LIGHT HEAD Worlds first focusing near infrared illuminator that focuses like a dedolight. With focusing range of 4° to 56°. Even light distribution in all focusing positions. Dimmable down to 5 %. Illumination up to 40 m (130 ft) (tested with Sony Nightshot Camcorder) Powers from any 6 V to 18 V DC power source. Power consumption is only 6 W Operates from - 40° C up to + 40° C. Various power cables and mounting accessories are available (see Ledzilla® accessory list).
WILL OUR NEW RANGE OF LED LIGHTS MAKE OUR PREVIOUS LIGHTS OBSOLETE ? Our focusing DLED lights dedolight DLED focusing LED lights The dedolight DLED focusing LED lights represent breakthrough technology in all aspects.
CLASSIC DEDOLIGHT – FOCUSING AND SOFT LIGHTS Low voltage systems Imaging accessories The special light sources dedolight’s use produce 40 lumen per watt whilst studio halogen lamps produce only 20 lumen per watt. Optical design matching the A traditional halogen Fresnel provides only 6 % efficiency in its spot position. dedolight’s have 3 times as much by virtue of the optics. Our low voltage light sources cost only 25 % in comparison to high voltage halogen lamps of the same output.
THE NEW 1200 W DAYLIGHT-SYSTEM Many years of experience culminate in this new concept. Double aspheric optics and zoom focus. These concepts are patented and have been twice recognized by the Oscar Committee of The Academy of Motion Picture Arts and Sciences. Higher light yield Higher focusability Perfect light and color distribution Highly efficient convection cooling Rainproof Super service friendly Flips open like a book – easy access Extremely low UV values, approx.
DEB1200D THE ELECTRONIC BALLAST Technical Data: DEB1200D Electronic Ballast Weight: 11,4 kg / 25 lbs DPOW1200D Cable Leading edge technology Low heat dissipation Silent ventilator remains off during normal operation and operates under high heat conditions only Active power factor correction (PFC) Funktional range from 90 - 264 V AC Overload protection Surge protection Short circuit protection Auto start function DMX control is standard Rainproof construction The ballast can be opened within 30 seconds – li
THE PORTABLE WINDOW A DEDICATED SOFT LIGHT SYSTEM Why do we call it dedicated ? Similar to the other known seven dedolight soft lights, these have been conceived exclusively as optimum soft light sources Light output is double in comparison to a soft box in front of a studio Fresnel light, because the actual light sources are placed in the focal point of the reflector Gentle wrap around character On an optimum soft light source, the light emission on the large diffuser should be perfectly even to the edge.
DEB400DT Electronic flicker free ballast for daylight and tungsten discharge lamps. DLHPA7-EXT When you don‘t need daylight and the flexibility to change between daylight and tungsten (interchangeable lamps), you may want a pure halogen tungsten light source. DPOW400DT Yoke Extension For use with PanAura® 7 in tilted position for extra distance between light stand and PanAura® 7.
Size, Depth, Weight The PanAura® family comes in 3 sizes, all offer superb soft light character without any hot spot, and the choice of different inner diffusers allows smooth and even light distribution or the typical PanAura® look with the brighter rim towards the outside - the true loving, caressing wrap-around light character. When working in confined areas the depth of the light head can make the decisive difference whether this wonderful, creative tool can be used at all.
WIDE EYE - NEW WIDE ANGLE OPTIONS ENABLES FOCUS RANGE LIKE NO OTHER LIGHT.
120 V max. 1 kW 10.35" (263 mm) 2.84" (72 mm) DLDIM2000-DMX DLDIM2000 with integrated DMX control This dimmer can control many dedolight tungsten focusing and soft lights along with lights of other manufacturers up to 2 kW at 230 - 240 V or up to 1 kW at 100 -120 V. Since these DMX - controlled dimmers are 10.35" (263 mm) noiseless, they can be mounted next to the light. Mounting devices for attaching to pipes via clamps are available.
BACKGROUND FX GLASS To be used with our DP1S Imager ( Ø 55 mm), DP1 ( Ø 66 mm) and DP400 ( Ø 100 mm) imagers. Background FX glass quickly change any flat, drab background into a stunning piece of set design. With eleven different patterns and eight colors, dozens of effects can be created. Focusing and defocusing the pattern changes the mood. Sandwich them together with standard metal gobos and you have an even wider choice.
DIRECTIONAL BEAM SPREADER DWAFX A special structure in a metal frame / holding ring – These unique light-shaping attachments spread the defined beam of the focusing dedolight in one direction. The orientation of the beam spread can be rotated.
SLIDE PROJECTIONS FOR STUNNING EFFECTS AND TEACHING LIGHTING SETUPS FOR VIRTUAL STUDIOS With the slide holding attachments which are available for all series of dedolight, slides can be projected. For classic dedolight Usually this wants to be done from an angle, so that the person in front of such a projection will not be touched by the light from the slide projection. This can be done from an angle of 45° or 30°.
No distortion Distorted slide for 30° or 45° projection DP3 FELLONI as fill light with Grid FELLONI with warm colored gel For the projections of 45° or 30° angle we usually distort the slides in the computer before printing them, and then they will distort on the background onto which the slides are projected so that parallel horizontal description can be maintained.
Dedo Weigert Film GmbH DEDOTEC USA, INC. Karl-Weinmair-Straße 10 D-80807 Munich, Germany Phone: +49 - (0)89 - 356 16 01 Fax: +49 - (0)89 - 356 60 86 48 Sheffield Business Park Ashley Falls, MA 01222 Phone: +1 (413) 229 – 2550 Fax: +1 (413) 229 – 2556 info@dedoweigertfilm.de www.dedoweigertfilm.de www.dedolight.com E-mail: info@dedolight.