Installation Manual

Integrate the RF-160 in your DroneTracker Dedrone
14 v0.4 IM-Inst-RF160en
1
Start your web-browser and enter the address of your DroneTracker Server.
For an optimal use, Dedrone recommends Chrome or Firefox.
2
Log in the DroneTracker UI as an administrator or configurator. The default login
credentials are:
User: admin Password: dedrone
] The DroneTracker user interface appears.
3
Choose OPTIONS > Site Configuration.
4
Choose [Add] > Dedrone RF Sensor.
] The window Discovered Sensors appears.
5
Select the desired RF-160 and choose [OK].
] The RF-160 appears in the Site Explorer.
6
To sort the RF-160 in the Site Explorer, drag and drop the element to the desired position.
7
Choose [Save changes].
] The window Site Configuration disappears.
8
Choose OPTIONS > Map Editor..
9
• Choose [Add] > Sensor.
• Choose the desired RF-160 in the window Select sensor.
• Choose [OK].
] The RF symbol appears on the map.
10
Move the RF symbol per drag and drop on the installation position on the map.
If the sensor was installed and aligned with a GPS device enter the noted values in the
fields Longitude and Longitude.
11
To lock the settings activate the option Lock settings.
12
Choose [Save changes].
] The window Map Editor disappears.
Requirements:
` RF-160 is installed
` The power supply is working and the button at the RF-160 illuminates blue
` RF-160 is connected to the network
` The IP address of the DroneTracker Server is known
Procedure: