Installation Manual

Safety Dedrone
4 v0.4 IM-Inst-RF160en
1 Safety
1.1 Symbols
Symbol Explanation
Indicates a situation which, if not avoided, can result in property
damage
Information that is important for a specific goal, but is not
safety-relevant
Indicates a requirement for meeting a specific goal
Desired result
A problem that might occur
Action to resolve a problem
1.2 Intended Use
The RF-160 is a passive, network-attached sensor for the detection of radio frequencies (RF). The
RF-160 detects targeted radio signals of different drones and remote controllers and sends the
data via mobile data or local network connection, along with an alert to the DroneTracker System.
The RF-160 is intended for civil commercial and private use in conjunction with a DroneTracker
System.
The RF-160 is suitable for outdoor use.
Use this product only in accordance with the information provided in the enclosed documentation
and with the locally applicable legal standards and directives. Any other application may cause per-
sonal injury or property damage.
Any use of the product other than that described in the intended use section does not qualify as
appropriate. The enclosed documentation is an integral part of this product. Keep the documentati-
on in a convenient place for future reference and observe all instructions contained therein.
The type label must remain permanently attached to the product.
Compliance Information Statement FCC and IC
The RF-Sensor RF-160 complies with Industry Canada license-exempt RSS standard(s) and complies
with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital de-
vice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protecti-
on against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,