Instruction Manual

Table Of Contents

www.dedrone.com

QM-US-Safety-RF160en

Safety Information

Intended Use

The RF-160 is a passive, network-attached sensor for the detection of radio frequencies

(RF). The RF-160 detects targeted radio signals of different drones and remote controllers

and sends the data via mobile data or local network connection, along with an alert to the

DroneTracker System.

The RF-160 is intended for civil commercial and private use in conjunction with a

DroneTracker System.

The RF-160 is suitable for outdoor use.

Use this product only in accordance with the information provided in the enclosed

documentation and with the locally applicable legal standards and directives. Any other

application may cause personal injury or property damage.

Any use of the product other than that described in the intended use section does not

qualify as appropriate. The enclosed documentation is an integral part of this product. Keep

the documentation in a convenient place for future reference and observe all instructions

contained therein.

The type label must remain permanently attached to the product.

Compliance Information Statement FCC and IC

The RF-Sensor RF-160 complies with Industry Canada license-exempt RSS standard(s) and

complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may

cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in a residential

area is likely to cause harmful interference in which case the user will be required to

correct the interference at his own expense.

Modifications: Any modifications made to this device that are not approved by Dedrone

GmbH may void the authority granted to the user by the FCC to operate this equipment.

ution!

To prevent permanent exposure, the device should be installed and operated with a

minimum distance of 20 cm (7.87 in) between the device and your body.