Specifications

F20 Introduction

Cannot read Cards

• Ensure the magnetic stripe card has been swiped in the correct orientation.

• Ensure the chip card has been inserted in the correct orientation.

• Ensure the contactless card has been placed at a distance of 0 to 4 cm from the device.

• Test with another card of the same type.

Caution and Safety Instructions

• Do not attempt to disassemble, modify, service or repair any part.

• Do not use if damaged or with signs of tampering.

• Only use the device with supplied or manufacturer-certified accessories.

• To avoid the potential hazard of electrical shock do not use in wet environments or during an electrical

storm.

• Do not use in proximity of potentially flammable gases or substances.

• Ensure cables used do not cause a trip hazard or risk the device being dropped on to a hard surface.

• Do not expose to excessive heat or cold. Only operate between -10 °C and 50 °C.

• Before cleaning, disconnect from the electrical outlet. Use only a dry or dampened soft cloth.

• Do not immerse, use liquids, sprays or aerosol cleaners. Clean all spillages quickly.

• This device is intended for handheld use only or in an approved cradle/stand.

• Dispose any part in an environmentally sound manner and in accordance with local laws.

• F20 product will not be held liable for any damage resulting from user operation that does not comply

with the above-stated guidance.

• If the device will be stored/unused for extended periods of time, then it is imperative that the battery

be recharged every six months or sooner to at least 30–40% of maximum charge while the terminal is in ‘OFF’

position.

FR DE IT NL

BE LU DK IE

GB GR ES PT

FI AT SE PL

HU CZ CY SI

SK LV LT EE

BG RO MT HR

Note：

The symbol on the last page of User Manual shall

be put on the product packing as well. The

5150-5350MHz is for indoor use