Specifications

F20 Introduction
 UL RoHS
 Telec&JATE
 Amex
 Discover
 PURE
1.5 Installation
Step 1. Charging the device
• Insert the USB charging cable into the Type-C port on the upper right side of the device.
• Connect the other end of the USB charging cable into a powered USB socket.
• A charging symbol will appear over the battery symbol in the top right corner of the device during
charging.
• Charging of the battery will typically take between 1 and 3 hours, whilst not in use.
• Battery condition is indicated in the display when the device is switched on.
• The terminal is fitted with an internal rechargeable battery which can be removed or replaced. This
battery should be charged for at least 1 hours when using the terminal for the first time. It is recommended
that the battery is charged to at least 40% of its capacity every 4 months.
Step 2. Turning on the device
• Hold down the power button 2 seconds, the system will start.
• If required, remove the protective film from the display.
Step 3. Mobile payment application
Please follow the instructions provided by your bank or service provider to download the mobile
application onto this device.
Step 4. Performing a chip card sale transaction with PIN
• When prompted, insert the customer’s chip card into the slot at the right hand side of the device with
the chip facing upwards.