Specifications

F20 Introduction
• Follow the instructions provided by your bank or service provider to complete the transaction.
Step 5. Performing a magnetic stripe transaction
• During device operation you may be prompted to read a presented card by means of the magnetic
stripe.
• The magnetic stripe reader is a slot positioned on the top of the device. Swipe the card in a single
smooth motion from left to right.
• Follow the instructions provided by your bank or service provider to complete the transaction.
Step 6. Performing a contactless transaction
• Transactions may be completed using a contactless card or enabled product. The contactless symbol is
printed on the top of the device.
• To read a contactless card it must be positioned in close proximity to the device over the contactless
symbol.
• Follow the instructions provided by your bank or service provider to complete the transaction.
Troubleshooting
In the unlikely event you experience issues with this product, please follow the guidelines below. If this
does not resolve the issue, please contact your solution provider for further assistance.
No display
• Charge the device with the supplied USB cable.
• Ensure the USB socket being used is powered.
Poor battery life
• Ensure the power is being supplied during charging.
• Check battery charge indicator is at maximum
• Charge for 3 hours to ensure a full charge whilst not in use.