User Guide

FOR INSTALLATION ON DRIVER'S SIDE ONLY
STEP 8)
Install the larger part of the
How does a nutsert/blind nut work?
shock on the top ball mount.
The nutsert (blind nut) is the hardware that will be
installed into the tailgate. As you turn the nut on the install tool,
the nutsert begins to mushroom and spread out.
As the fingers expand, the threads are moving closer to
the edge of the tailgate to attach the mounting point for
the Tailgate Assist.
What if nutsert continues to spin without expanding?
There are two different options to get the nutsert to start the
expansion process:
1)
Place a small amount of the blue thread lock that comes
with the kit to the end of the screw. Allow the adhesive to dry.
Install the narrow end of the
This step will keep the nutsert from spinning and allow the
shock on the bottom ball mount
nutsert to expand.
plate.
OR
2)
Place masking tape around the hole on the tailgate.
This will create a rough surface for the nutsert to rest against
to initiate the process by separating the two smooth surfaces
of the painted truck body and flange of the nutsert.
Can the Tailgate Assist be installed on the passenger’s side?
No. The unit will not work on the passenger side of the truck bed.
Periodically check the upper and lower mounting locations to insure
The passenger side of the vehicle that has the slot that allows
that parts have not loosened through repeated use. If either mounting
the tailgate to be removed.
location is found to be loose, re-tighten the hardware as needed.
Do you have installation videos?
Yes. All installation videos can be viewed at:
FAQ's
WWW.DEEZEE.COM/TAILGATEASSIST
DZ 43101 6/17/2015