Instruction Manual

DZ1030.PDF 06/02/99 PAGE 6
13
14
7/16“
D
E
S
T
D
E
P
Drill two 1/4“ holes through angle brace (D), using mounting brace (E)
as a guide. Note: Repeat this process for each angle brace (D) location.
Place 1/4 x 3/4“ hex head bolts (P) through mounting bracket (E) and angle brace
(D). Secure into place using 1/4“ flat washer (T) and 1/4“ hex nut (S).
Note: Repeat this process for each
mounting bracket (E) location.