Operating instructions

21
5.3 Activating the "Passive mode"
Pool monitoring outside bathing hours
For pool monitoring outside bathing hours the “Passive mode” must be acti-
vated.
Note: A detailed description of the passive mode can be found on page 10. See page
page 29 for a description of how the passive mode is used in day-to-day operations.
Procedure:
Press the button.
If PIN protected: Enter the 4-gure PIN and then press OK (see page 27).
The LED alongside the button will ash until the waves have sub-
sided.
Warning!
Risk of drowning because the BlueFox system is not moni-
toring the pool. If the passive mode LED is ashing BlueFox
is not monitoring the pool. The pool must be monitored by
a person.
Following successful activation of the passive mode the LED alongside
the button will illuminate permanently.