Operating instructions

33
9.3 Programming the alarm depth and time
The alarm depth and alarm time are programmed using the BlueFox control soft-
ware. Installation of the software is described in the section Installing the BlueFox
Control software, P. 36.
Caution!
Humidity may damage USB plug-in mains adapter, USB cable and mag-
netic adapter.
Only connect monitoring bracelets to the PC in dry rooms.
Before connecting monitoring bracelets, dry them using a dry cloth.
y Connecting a monitoring bracelet to a PC:
Magnetic adapter
Monitoring bracelet
1
3
2
USB cable
y Connect the USB cable (small
plug) to the magnetic adapter
1.
y Connect the magnetic adapter to
the monitoring bracelet 2 (note
correct alignment).
y Connect the USB cable (large
plug) to the PC 3.
y Allocate each person or group of people an individual alarm depth and alarm
time together with a monitoring bracelet colour.
y Enter the alarm depth and alarm time together with the associated monitoring
bracelet colour into the Conguration table, P. 47, .
y Open the BlueFox Control software:
Double-click the symbol on the desktop or navigate via
Start > Program > BlueFox Control.