Specification

POLIMAXXSP100
Acrylonitrile Butadiene Styrene
IRPC Public Company Limited
www.ulprospector.com
Technical Data
1 of 2 Form No. TDS-20792-en
UL and the UL logo are trademarks of UL LLC © 2018. All Rights Reserved.
UL Prospector | 800-788-4668 or 307-742-9227 | www.ulprospector.com.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL
assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product
or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The
content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.
Document Created: Wednesday, January 10, 2018
Added to Prospector: November 2000
Last Updated: 1/5/2017
Product Description
SP100 is a super high impact grade of ABS resin for injection molding process. It is suitable for auto parts (motorcycle component), refrigerator
handle, and electrical appliances where need super high impact strength.
General
Material Status
•
Commercial: Active
Literature
1
•
Technical Datasheet (English)
UL Yellow Card
2
•
E132283-222085
Search for UL Yellow Card
•
IRPC Public Company Limited
Availability
•
Asia Pacific
•
Europe
•
North America
Features
•
Food Contact Acceptable
•
Ultra High Impact Resistance
Uses
•
Appliance Components
•
Automotive Applications
•
Electrical/Electronic
Applications
•
Handles
Agency Ratings
•
FDA 21 CFR 181.32
RoHS Compliance
•
RoHS Compliant
Processing Method
•
Injection Molding
Physical Nominal Value (English) Nominal Value (SI) Test Method
Melt Mass-Flow Rate (MFR) (220°C/10.0 kg) 18 g/10 min 18 g/10 min ASTM D1238
Mechanical Nominal Value (English) Nominal Value (SI) Test Method
Tensile Strength (Yield, 73°F (23°C)) 6400 psi 44.1 MPa ASTM D638
Flexural Modulus (73°F (23°C)) 313000 psi 2160 MPa ASTM D790
Flexural Strength (Yield, 73°F (23°C)) 9250 psi 63.7 MPa ASTM D790
Impact Nominal Value (English) Nominal Value (SI) Test Method
Notched Izod Impact ASTM D256
73°F (23°C), 0.250 in (6.35 mm) 6.2 ft·lb/in 330 J/m
Hardness Nominal Value (English) Nominal Value (SI) Test Method
Rockwell Hardness ASTM D785
R-Scale, 73°F (23°C), 0.250 in (6.35 mm) 110  110 
Thermal Nominal Value (English) Nominal Value (SI) Test Method
Deflection Temperature Under Load ASTM D648
66 psi (0.45 MPa), Unannealed, 0.250 in (6.35
mm)
194 °F 90.0 °C
264 psi (1.8 MPa), Unannealed, 0.250 in (6.35
mm)
183 °F 84.0 °C
Flammability Nominal Value (English) Nominal Value (SI) Test Method
Flame Rating (0.06 in (1.5 mm)) HB  HB  UL 94
Injection Nominal Value (English) Nominal Value (SI)
Drying Temperature 176 to 185 °F 80 to 85 °C 
Drying Time 2.0 to 5.0 hr 2.0 to 5.0 hr 
Processing (Melt) Temp 374 to 464 °F 190 to 240 °C 
Notes
1
These links provide you with access to supplier literature. We work hard to keep them up to date; however you may find the most current
literature from the supplier.
2
A UL Yellow Card contains UL-verified flammability and electrical characteristics. UL Prospector continually works to link Yellow Cards to
individual plastic materials in Prospector, however this list may not include all of the appropriate links. It is important that you verify the
association between these Yellow Cards and the plastic material found in Prospector. For a complete listing of Yellow Cards, visit the UL Yellow
Card Search.
3
Typical properties: these are not to be construed as specifications.