Operation Guide

3) Real-time scale of water depth: This scale allows users to intuitively view the depth of water and
fish's colonies.
4) Power: This icon indicates the power of the WiFi probe, and displays the remaining power as a
percentage. It is recommended to use a 5V/1A charging head. A full charge takes 4-6 hours.
5) Fish icon: When the fish icon is turned on, when the sonar detects a fish, the big fish, medium fish,
and small fish will be displayed according to the size of the fish.
6) Fish depth: This value represents the depth of the fish, and the number above the fish icon
represents the depth of the fish.
7) Bottom contour: The bottom contour indicates the change of the bottom depth during the
detection time. The underwater contour is refreshed from right to left, and the refresh rate is 6-10
frames per second, automatically switching according to the depth.
8) Settings: Clicking on the icon will slide out several items that need to be set from the left, which
can be adjusted according to the situation.
9) Sonar switch: turn on the sonar, the sonar will enter the working state; turn off the sonar, the
sonar will stop working.
Setting interface function introduction:
1) Beam angle: wide beam angle, large detection range, but low accuracy; narrow beam angle, small
detection range, but high accuracy
2) Sensitivity: The higher the sensitivity, the smaller the energy feedback displayed; the lower the
sensitivity, the stronger the energy feedback displayed.
3) Mode switching: The concise mode only displays the terrain and fish symbols, and the rendering
mode is to display the terrain and fish symbols as well as feedback the energy of the detected objects.
The rendering mode is displayed by default.
4) Fish size: used to set whether to display the fish icon and depth function. The fish detected by the
sonar is screened and displayed according to the size. For example, when "Large" is selected, the
interface will only display the large fish detected, and the small and medium-sized fish detected will
not be displayed. By default, all detected fishes of large, medium and small are displayed.
5) Incoming fish reminder: used to set whether to turn on the incoming fish reminder function. If it is
turned on, when a fish is detected, the software will sound a reminder to remind the user that a fish
has appeared.