User's Manual

50 Operation
>
Warning
y UV processing started by entering a room n
umber will take up to 30 minutes.
If you have selected a mapped space for
UV processing, UV processing will take u
p to 2 hours. If the robot is not linked to
a mobile device, never enter the UV pro
cessing target space before the maximu
m UV processing time has passed.
y If the robot is connected to the APP, you ca
n check the start time, room number, and
UV strength in the APP as well.
y UV processing can be stopped with the AP
P during operating.
,
Note
Operation
4
y You can adjust the standby time in the Se
ttings menu. (See page 30.) The default
value is 20 seconds.
y Pausing standby will stop the countdown ti
mer and initialize the standby time.
y Press [ ] (Previous) to cancel the operation
and move back to the previous screen.
y If you need to stop UV processing due to an
urgent reason and the robot is not
linked to a mobile device, press [Stop] on t
he screen. UV processing will stop. Press [C
ancel] to close the pop-up.