User's Manual

56 Operation
14 Press [Start].
The UV processing-ready screen will ap
pear.
The robot waits for the set amount of ti
me to allow the user and all other
persons to exit the target space before sta
rting UV processing.
>
Warning
Operation
4
y You can adjust the standby time in the Se
ttings menu. (See page 30.)
y Pausing standby will stop the countdown ti
mer and initialize the standby time.
y Press [ ] (Previous) to cancel the operation
and move back to the previous screen.
y If you need to stop UV processing due to an
urgent reason and the robot is not
linked to a mobile device, press [Stop] on t
he screen. UV processing will stop. Press [C
ancel] to close the pop-up.
15 To stop UV Processing, press the
emergency stop button, or press the pause
button if it is not on the standby screen.
,
Note
Y UV processing started by entering a room
number will take up to 30 minutes.
If you have selected a mapped space for UV
processing, UV processing will take up to
2 hours. If the robot is not linked to a mo
bile device, never enter the UV processin
g target space before the maximum UV p
rocessing time has passed.
y If the robot is connected to the APP, you c
an check the start time, room number, a
nd UV strength in the APP as well.
y UV processing can be stopped with the AP
P during operating.