User's Manual

Before Use 7
Before Use
1
y The robot may not be able to move normally in places where illumination of the light reflec
ted on it by the floor or surrounding objects (glossy floor, mirror, etc.) is too high or low. M
aintain a proper illumination level within the robot’s travel range.
- Failure to do so may cause an accident due to a traveling error or mis-detection of obst
acle.
y In an urgent situation where an accident seems likely and sudden braking is necessary, pres
s the emergency stop button to stop the robot. LG does not guarantee quality of the produ
ct damaged due to a collision, etc. that may occur during an emergency stop.
y Do not push or pull the robot while it is traveling or waiting.
- Doing so may cause the robot to fall over, failure or accident.
y Children, the elderly and animals within the robot’s travel range are at risk of collision and
injury. Please be mindful.
- The robot is not intended for use by young children or invalids.
y Do not allow children to hang on or climb on the robot.
- It may cause injury due to falling or collision.
y Do not push or pull the lamp guard while the robot is traveling or waiting.
- Danger of UCV exposure and injury.
y Do not lean on the lamp while the robot is traveling or waiting.
y Make sure that the lamp does not break while the robot is being moved manually.
y Stop using the robot and the charger when there is a smoke or an unusual smell. Turn off th
e power and unplug the power cable.
- If you continue to use the product, there is a risk of electric shock or fire.
y A person who lacks physical, sensory, mental abilities, or experience and knowledge (inc
luding children) cannot safely use this product.For safe use, supervision of the supervis
or is required to ensure that only pre-trained personnel can use the robot.
- There is a risk of electric shock, burns or injury.
y Do not disassemble or attempt to repair the robot on your own.
- Doing so may cause electric shock, fire or damage.
y Slopes, stairs and high places are not suitable places for the robot to operate on. Use the r
obot only on a flat ground.
- The robot may fall, causing product damage or accident.
y Obstacles at low heights such as wallets, rods and boxes within in the robot’s travel path m
ay not be detected. The robot may move over such obstacles, which can cause damage or
injury. Remove any obstacles on the robot’s path.