User's Manual

Before Use 9
Before Use
1
y Follow all local ordinances and regulations when handling or disposing of the battery.
y Have servicing performed by a qualified repair person using only identical replacement par
ts. This will ensure that the safety of the product is maintained.
y Do not modify or attempt to repair the robot or the battery pack (as applicable) except as ind
icated in the instructions for use and care.
y In case rechargeable battery is included in this robot, the entire device should be recycled in
compliance with rechargeable battery recycling standards because of the internal battery. T
o dispose of properly, call [phone] or visit www.call2recycle. org
y For parts replacement, only the designated parts may be used. Repair work must only be p
erformed by a qualified worker. This is to maintain the product’s safety.
y When restarting the battery, turn it off and wait for 5 seconds before turning it on again.
y There is a small coin-type battery inside, so be careful not to swallow it.
y Do not arbitrarily disassemble and assemble the battery. Damage to the product and high
current can cause injury. If you need to decompose, please contact the service center.
CAUTION
INSTALLATION
y Do not hit or apply shock to the robot.
- Doing so may cause damage to the robot.
y Do not press the LCD screen too hard.
- Doing so may lead to product failure.
y Do not cover a part (sensor, etc.) or the entire body of the robot with a cloth or table
cloth.
- Doing so may make the robot unable to travel properly or cause a traveling error, whi
ch may lead to failure or accident.
y Do not operate the robot in an environment outside the temperature range 0°C - 40°C
(32°F - 104°F).
- It may cause robot malfunction. The robot may stop when it is out of a certain tem
perature range. After returning to the normal temperature range, normal operatio
n is possible.
y Store the robot at room temperature.
- Failure to do so may cause malfunctioning and shorten the product life.