1.3 Trimmer Function ©5050 F/B Sideways Drift Trim: if the drone drifts forward, hold down the"Speed Switch” button and do not release it while pushing the direction joystick down to re balance the drone. If the drone drifts backwards, hold down the"Speed Switch” button and da ot release it while pushing the direction Joystick up to re balance the drone.
11.4 Take Photo / Video Take Photo: Short press the Photo bunion on the transmitter to @ke pictures. One beep can be heard from the transmitter, indicating the camera has successfully taken one photo. Record Video: Short press the Video button on the transmitter, two beeps from the transmitter wil be heard. This tells you that the camera has started recording video. You can exit the recording by pressing the same button again 4 Do not cake photos during the recording, which will Interrupt the recording.
11.5 Altitude-Hold Function The drone Is designed with altitude-hold function so the drone can maintain its altitude after you release the left joystick | the left Joystick will automatically spring back St tithe middies ). 11.6 360° Flip When you get familiar with all the frictions of the drone, you can ry this ‘amazing flip mode.
11.7 Circle Fly Long press for 3 seconds Press and hold the Photo button for about 3 seconds, the drone will enter the Circle Fly mode. Exit the Circe Fly mode by long pressing the same button again or pushing the direction joystick. 11.8 Auto-Rotation Long press for 3 seconds s Press and hold the Video button for abut 3 seconds, the drone will enter the Auto-Rotation mode. Exit the Auto-Rotation mode by long pressing the same button again or pushing the direction joystick.
11.9 Headless Mode 1. After pairing/ calibration, or during the fight of the drone, short press the Headiness Mode button o enter Headless Mode. In Headless Mode, the: indicator lights of the drone will flash continuously, and the transmitter will send out alarm sound continuously. 2. Short press the Headless Mode button again and you will hear one Beep, which indicates the drone exits the Headless Mode. < TARS HEAL \ 1/ Please make sure the pilot to stay in the same orientation as the drone head faces when
12.0 SPECIFICATIONS +DRONE Model: D10 Weight: 158g/ 55702 Max Flight Time: 12 mintiest [per battery) Operating Temperature Range: 32 to 104°F {0 to 40°C} Size: 340*340*65 mm {Unfolded} 180*142*65mm {Voided} + DRONE BATTERY Capacity. 1000mAh Voltage: 3.7V Energy: 370 Wh Battery Type: Li Po Battery Charging Temperature Range: 41° 10 104°F {5° t0 40°C) Charging Time: 90 minutes {depends en charging power and remaining battery power] Operating Frequency: 2.
+ CAMERA Photo Resolution: HD1280x%720F {stored on the phone] Video Resolution: HD1280%720P {stored on the phone) Max Transmission Distance: 164 feel 50m rigors and Instructed) Transmission Frame Rate: 25 fps Photo Formats: JPEG Video Formats: AV1/ MP4 Operating Temperature Range: 32*to 104°F j0" 10 40°C) + USB CHARGING CABLE Voltage: 5V Rated Power: <10 W/ 13.0 CONTACT US Please do ot hesitate to contact us if you need further support. .
14.0 GENERAL INFORMATION FCC statement: Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: {1} This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RF Exposure The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with minimum distance 20cm between the radiator & your body. This part belongs to the drone. RF waning for Portable device: The device has been evaluated to meet general RF exposure requirement.
BATTERY WARNING: 1. Failure to follow all the instructions may resit in serious injury, irreparable damage to the battery and may cause a E fire. smoke or explosion. 2. Airways check the battery’s rendition before charging or IR singing. 3. Replace the battery if it has been dropped, or in case of oar, overheating, discoloration, deformation o leakage. 4. Never use anything other than the approval Li Po charger the battery. Always use a balancing charger for Li Po cells or a Li Po cell balance.
11. Non-chargeable batteries are not to be recharged. Rechargeable batteries are only to be charged under adult supervision. 12. Different types of batteries or new and used batteries are not to be mixed. 13. Batteries are to be inserted with the correct polarity. 14. The supply terminals are not to be short-circuited. Regular examination of transformer or battery charger for ary damage to their cord, plug, enclosure and other parts and they must ot be used until the damage has been repaired. 15.
