Users Manual


3 x 1.5V AAA
(Not included)
< BATTERY INSTALLATION >
① Unscrew and open the battery cover.
② Insert 3 AAA batteries in the correct direction.
③ Close the battery cover and lock it.
Push the battery into the bottom battery compartment of the
helicopter in the correct direction.
① If the remote will not be used for a long time, make sure
to turn it off and remove the batteries.
② When the remote runs out of power, the remote's power
indicator will flash.
If the helicopter will not be used for a long time, make sure
to turn it off and remove the battery.
1. Remote’s Battery
2. Helicopter’s Battery