INSTALLATION INSTRUCTION Drop-in Bathroom Sink www.deervalleybath.com | (+1) 312-626-9466 | service@ deervalleybath.
Prior to Installation: Observe and comply with all building and plumbing codes. As our basins are handcrafted and dimensions are approximate, we recommend using the actual basin for the cutout. Use 100% Silicone (non-water based) for all installations. Ensure adequate space behind the basin for faucet and backsplash, including the full range of motion for faucet handles and spouts. Make sure a watertight seal exists on all drain connections. Do not place basin directly on floor.
INSTRUCTIONS (1) SUGGESTED TOOLS AND MATERIALS Tube Cutter Adjustable Wrench Pencil Pipe Wrench Safety Glasses Jigsaw Hacksaw Keyhole Saw Tape Measure Drill Thread Sealant Sealant-We recommend the use of a stone, marble and granite silicone caulk or a general purpose silicone sealant. WARNING: To reduce the risk of injury or property damage, read and follow all of the installation instructions before installing this product and wear safety goggles.
(2) INSTALLATION STEPS Step1: Drill a pilot hole and cut the countertop Step2: Verify the fit. adjust the cutout if needed. Step3: Apply sealant and wipe away any excess. Fill voids and allow to dry. Step4: Run water and check for leaks. -3- (+1) 312-626-9466 www.deervalleybath.
Phone: (+1) 312-626-9466 Address: 2645 Maricopa St Torrance, CA 90503 Email: service@deervalleybath.com Web: www.deervalleybath.com ONE YEAR LIMITED WARRANTY LIMITED WARRANTY COVERAGE 1 YEAR LIMITED WARRANTY DeerValley products are made with quality materials and excellent craftsmanship to provide the customers a long-lasting product.
