Installation and Owner’s Manual Smart Toilet (DV-1S0029) NOTE: Drawings may not exactly define contour of the product. www.deervalleybath.com | (+1) 312-626-9466 | service@ deervalleybath.
(+1) 312-626-9466 service@deervalleybath.
Important Safe Guards 02 Explanation of Terms and Symbols 03 WARNING & Attention 04 Product Installation 10 Tools needed 10 Parts included 10 Parts Diagram 11 Smart Toilet overall view 11 Remote Control 12 Precautions before Installation 13 Installation The Smart Toilet 14 Install the Remote Control 18 Install the Remote Control 11 Test before Use 12 Remote Control Operation 20 Knob and Other Operation 24 Battery Backup Installation 26 Specifications 26
Installation and Owner’s Manual 1. Important Safe Guards IMPORTANT SAFEGUARDS When using electrical products, especially when children are present, basic safety precautions should always be followed, including the following: GROUNDING INSTRUCTIONS This product must be grounded. In the event of an electrical short circuit, a grounded product reduces the risk of electric shock.This product is equipped with a cord having a grounded wire with a grounded plug.
Installation and Owner’s Manual 2. Explanation of Terms and Symbols Thank you for purchasing our product. Please read this User Manual before installation and use and save it for future reference. The hazards and warnings listed herein are important to our users' safety. Significant consequences may result from failure to heed warnings. Explanation of Terms and Symbols WARNING Indicates possible injury or death resulting from improper usage due to disregarding this message.
Installation and Owner’s Manual 3. WARNING & Attention WARNING This product needs to be properly grounded. Risk of electric shock. If unsure, contact an electrician. Do not place a lit cigarette along with other burning objects into the unit. Risk of fire. Do not touch, insert or pull out the power plug with a wet hand. Risk of electric shock. Do not use during thunderstorms (pull out the power plug during storms). Failure in doing so may lead to injury or malfunction.
Installation and Owner’s Manual WARNING Regularly unplug the unit from power and wipe off any dust on the plug using a dry cloth. Risk of fire. Young children, the aged and the physically disabled should be given supervision by a person responsible for their safety while using the unit. Otherwise, prolonged use may cause low temperature burns. Do not pull, damage, bend, twist, stretch, roll, bundle, clamp or squeeze the power cable. Do not place anything on power cable. Risk of fire and/or electric shock.
Installation and Owner’s Manual WARNING Do not disassemble, repair or alter this product on your own. Call in a professional or contact HuiDa for future advise. Risk of fire, electric shock, and/or other accident that may lead to injury. Do not use industrial or polluted water. Risk of cystitis, dermatitis and electric shock and fire due to internal corrosion of the unit. Do not apply any force to the unit's seat and lid. Do not stand on the lid or open or close the lid and the seat forcefully.
Installation and Owner’s Manual BATTERY WARNING Read the following for proper battery usage: ●Properly install the battery according to its correct polarity. ●Remove the battery during long periods without use. ●Replace the battery before it reaches the end of its usage. Failure to do so may result in interrupted signals. ●Cover the battery with tape before disposal. This will prevent battery fluid leakage that may cause fire and / or other damages. ●Place the battery out of children and infant reach.
Installation and Owner’s Manual ATTENTION To avoid danger from false reset of the thermal breaker, do not supply power through an external switching device, such as a timer, or connect to a circuit that is periodically turned on and off by a general-purpose component. Do not hit the ceramic with gravity to prevent damage and water leakage. Do not spray urine on the nozzle. Dirt may cause clogging. Please do not bury cementitious materials (cement mortar, etc.
Installation and Owner’s Manual ATTENTION Unplug the unit when the product is in disuse for a long time. Make sure to shut off the water supply and drain the water inside the product. Risk of fire, leakage and product damage. Do not use old hose to connect to unit. Use the one provided with your product. Anything else connected to the older hose may need replaced. Risk of water leakage and property loss. When storing or transporting in cold climate, make sure to drain the water from the unit.
Installation and Owner’s Manual 4. Product Installation (1) Tools needed Drill(with 6mm Bit) Raw Tape Utility Knife Marker 23-26mm(Adjustable Wrench) Screwdriver Tape Measure Measuring Cup (2) Parts included Smart Toilet T-Valve Wax Ring Remote Control assembly Operating instruction and other prints Connector Floor Bolts Please confirm that all articles in the package are complete.
Installation and Owner’s Manual 3. Parts Diagram (1) Smart toilet overall view Safety Instruction Cover Power Plug Dryer Nozzle (Rear Wash and Front Wash) Knob Toilet Water Supply Hose Heated Seat Feminine Seat Sensor Tee valve Toilet Water Supply Angle Valve Foot Touch Intelligent Toilet Water Supply Hose knob The appearance and functions of the real product shall prevail. NOTE: Drawings may not exactly define contour of the product. -11- (+1) 312-626-9466 www.deervalleybath.
Installation and Owner’s Manual (2) Remote Control Night Light Hot/Cold Alternate wash with hot and cold water On/off of night light Nozzle Clean Key for nozzle clean Feminine Feminine Used for wash of female's Dryer Dry washed part with warm air Flush Water Temp. Flush after use Water temperature can be adjusted at wash Posterior Dryer Temp. Used for posterior wash Temperature of warm air can be adjusted Position Adjustment of 5 levels can be realized at nozzle's position Seat Temp.
Installation and Owner’s Manual (3) Precautions before Installation Water Pressure Requirements The minimum dynamic operating water pressure is 25 Psi, and the maximum static water pressure is 80 Psi. 15.78 18.54 26.88 NOTE: Drawings may not exactly define contour of the product. -13- (+1) 312-626-9466 www.deervalleybath.
Installation and Owner’s Manual 4. Installation The Smart Toilet (1) Draw a cross marker on the drain outlet on the ground. Clean the floor and wipe off any excess dust or dirt . Failure to install on an cleaned surface will affect the quality of installation. Existing water supply angle valve Grounded waterproof and splashproof electrical outlet. 8" (200mm) Drain outlet Cross marker 12" (305mm) (2) Installation of floor flange. Ground Flange (3) Install smart toilet bottom flange anchor screw.
Installation and Owner’s Manual (4) Install the wax ring and brass floor bolts onto floor flange. Center and press the wax ring on the floor flange. Insert the 2 brass floor bolts flat head thru the appropriate slot in the floor flange. Use the provided plastic floor bolt washer to secure the floor bolts on the floor flange. Brass bolts should remain verticle FIGURE 5A. Install the wax ring at the sewage outlet of the product FIGURE 5B.
Installation and Owner’s Manual (7) Conncting the tee valve to shut off valve and connecting braided water supply hoses. With the 3/8" male connection facing to the right, apply Telflon tape and screw on adapter (supplied). FIGURE 9B FIGURE 9A Connect tee valve to male thread on adapter (apply Telflon tape to male threads). Connect braided supply tubes to tee valve male connections.
Installation and Owner’s Manual (9) Connect the power supply. Connect the ground wire. Power plug into the AC 120V socket. Confirm whether the power is connected. Note: Confirm indicator light on the power plug. A lit-up power indicator light will confirm that the smart toilet is powered-on. When powered on, press and hold the knob for 3 seconds to enter standby mode. NOTE: Drawings may not exactly define contour of the product. -17- (+1) 312-626-9466 www.deervalleybath.
Installation and Owner’s Manual 5. Install the Remote Control (1) Install the Remote Control 1. According to the location of the screw holes of the remote control holder, drill two holes with a 6mm-diameter drill.bit on the wall with a depth greater than 45mm. 2. Install the expansion tube into the holes. 3. Place the remote control holder onto the fixing hole. 4. Fix the remote control holder with the configured expansion screws. 5. Open the battery area of the remote control and install new batteries. 6.
Installation and Owner’s Manual (2) Test before use Test run (test all function buttons on the remote control and the knob on toilet body.) ● Is each function of the product normal? Are the rear wash and front wash (including spray strength adjust ment, nozzle position adjustment), dryer, air temperature, water temperature and seat temperature, nozzle clean working normally? All the above series of actions should be checked.
Installation and Owner’s Manual 6. Remote Control Operation The product has a built-in sensor in the seat. If user is not seated properly, the rear wash, front wash and dryer functions cannot be operated. Feminine Press "Feminine " key. Water flow for wash is jetted out of the front end of the nozzle, and the private part of female is washed by way of wash in movement. Press it again to turn off wash in movement. Feminine Posterior Press "Posterior" key.
Installation and Owner’s Manual Hot/Cold Press "Hot/Cold" key, and Hot/Cold function will be enabled or disabled. In wash mode, press Hot/Cold key to realize cold and warm water wash alternately. This function can only be used in wash mode. Feminine Dryer Press "Dryer" for drying washed part. Press Dryer for drying washed part. When it is switched to warm-air temperature, press “ Dryer Temp.” key, current temperature level will be displayed when the key is pressed for the first time.
Installation and Owner’s Manual 《 Water Temp. Press "Water Temp." key to adjust water temperature for wash. Current temperature level will be displayed when the key is pressed for the first time. When it is pressed again, temperature level will be switched, and proper temperature can be set.
Installation and Owner’s Manual 《 Nozzle Clean Press "Nozzle Clean" key. ●The cleaner sticks out for manual wash. This function can only be used when the human body or other objects do not contact the seat ring sensing area. ●When the human body is sitting in place, press “Nozzle Clean key” to realize on/off of wash with air bubbles. This function can only be in wash mode. Feminine Night light Press "Night light" key. Night light will be on or off. Position Press "Position" key.
Installation and Owner’s Manual 7. Knob and other operation Posterior Feminine Powered on and seated, with front wash, reash wash and dryer functions off. Powered on and seated, with front wash, reash wash and dryer functions off. Turn the knob counterclockwise for auto front wash with default oscillating function.The entire process will consist of 4 mins front wash + 3 mins dryer+ flushing once while drying.
Installation and Owner’s Manual Deodorization The function will operate automatically. Deodorizing fan automatically turns on after seating and turns off 3 minutes after leaving the seat. Auto flush Human body leaves the seat sensor area after seating. When the human body leaves the seat after seating, it will automatically flush once. Kick to Flush Kick the "foot touch button". to flush the toilet. Do not kick with force or high frequency. NOTE: Drawings may not exactly define contour of the product.
Installation and Owner’s Manual 8. Battery Backup Installation Reach into the bottom of the toilet lid and lift the lid upward ; Remove the battery cover by unscrewing it with a Phillips screwdriver; insert the battery (9V battery), cover the battery cover and tighten it with a screwdriver; Place the toilet cover flat and press down to fix the toilet cover. After installing the battery, press this button to realize the power failure flushing function.
Installation and Owner’s Manual 9. Specifications (1) Product specifications Power rating 110V~120V Frequency 60Hz Rated power input 1050W(When inlet water temp in 15℃) Seat and dryer temperature range 39.4 °F~104 °F Source water temperature range 39.
Installation and Owner’s Manual (2) Function Table Category Function Posterior (Rear cleaning) Feminine (Front cleaning) Instant heating Cleansing Comfort Oscillating cleaning Hot & cold massage cleaning Water pressure adjustment Water temperature adjustment Nozzle position adjustment Self-cleaning nozzle Antibacterial nozzle & seat cover Instant heating Seat heating Seat ring temperature adjustment Warm wind drying Warm wind temperature adjustment Air-cleaning filter system Soft close seat cover Elect
Installation and Owner’s Manual (3) Regular maintenance Regular maintenance is required to ensure normal use Cut off the power and water supply before maintenance. Direct water wash to the entire product is prohibited. WARNING Do not spray water or detergents on the toilet, remote control orthe power cord. Doing so may cause electrick shock or fire. Maintenance during Winter Season During winter season, the water inside may freeze after long periods of storage and non-usage.
Installation and Owner’s Manual (4) Problems & Solutions Problems Problems Check whether or not the Tee valve is blocked The cleansing is always leaking NOTE: Drawings may not exactly define contour of the product. -30- (+1) 312-626-9466 www.deervalleybath.
Installation and Owner’s Manual Problems Problems Problems Problems Problems NOTE: Drawings may not exactly define contour of the product. -31- (+1) 312-626-9466 www.deervalleybath.
Phone: (+1) 312-626-9466 Email: service@deervalleybath.com Web: www.deervalleybath.com ONE YEAR LIMITED WARRANTY LIMITED WARRANTY COVERAGE 1 YEAR LIMITED WARRANTY DeerValley products are made with quality materials and excellent craftsmanship to provide the customers a long-lasting product.
