Installation and Owner’s Manual Smart Toilet (DV-1S0150) NOTE: Drawings may not exactly define contour of the product. www.deervalleybath.com | (+1) 312-626-9466 | service@deervalleybath.
(+1) 312-626-9466 service@deervalleybath.
Important Safeguards 02 Explanation of Terms and Symbols 03 Warnings & Attention 04 Product Installation 10 Tools needed 10 Parts included 10 Parts Diagram 11 Smart Toilet Overview 11 Remote Control 12 Precautions Before Installation 13 Install the Smart Toilet 14 Install the Remote Control 18 Test Before Use 19 Remote Control Operation 20 Knob and Other Operation 24 Battery Backup Installation 26 Specifications 26
Installation and Owner’s Manual 1. Important Safeguards IMPORTANT SAFEGUARDS When using electrical products, especially when children are present, basic safety precautions should always be followed, including the following: GROUNDING INSTRUCTIONS This product must be grounded. In the event of an electrical short circuit, a grounded product reduces the risk of electric shock.This product is equipped with a cord having a grounded wire with a grounded plug.
Installation and Owner’s Manual 2. Explanation of Terms and Symbols Thank you for purchasing our product. Please read this User Manual before installation and use and save it for future reference. The hazards and warnings listed herein are important to our users' safety. Significant consequences may result from failure to heed warnings. Explanation of Terms and Symbols WARNING Indicates possible injury or death resulting from improper usage due to disregarding this message.
Installation and Owner’s Manual 3. WARNING & Attention WARNING This product needs to be properly grounded. Risk of electric shock. If unsure, contact an electrician. Do not place a lit cigarette along with other burning objects into the unit. Risk of fire. Do not touch, insert or pull out the power plug with a wet hand. Risk of electric shock. Do not use during thunderstorms (pull out the power plug during storms). Failure in doing so may lead to injury or malfunction.
Installation and Owner’s Manual WARNING Regularly unplug the unit from power and wipe off any dust on the plug using a dry cloth. Risk of fire. Young children, the aged and the physically disabled should be given supervision by a person responsible for their safety while using the unit. Otherwise, prolonged use may cause low temperature burns. Do not pull, damage, bend, twist, stretch, roll, bundle, clamp or squeeze the power cable. Do not place anything on power cable. Risk of fire and/or electric shock.
Installation and Owner’s Manual WARNING Do not disassemble, repair or alter this product on your own. Call in a professional or contact service center for future advise. Risk of fire, electric shock, and/or other accident that may lead to injury. Do not use industrial or polluted water. Risk of cystitis, dermatitis and electric shock and fire due to internal corrosion of the unit. Do not apply any force to the unit's seat and lid. Do not stand on the lid or open or close the lid and the seat forcefully.
Installation and Owner’s Manual BATTERY WARNING Read the following for proper battery usage: Ɣ3URSHUO\ LQVWDOO WKH EDWWHU\ DFFRUGLQJ WR LWV FRUUHFW SRODULW\ Ɣ5HPRYH WKH EDWWHU\ GXULQJ ORQJ SHULRGV ZLWKRXW XVH Ɣ5HSODFH WKH EDWWHU\ EHIRUH LW UHDFKHV WKH HQG RI LWV XVDJH )DLOXUH WR GR so may result in interrupted signals. Ɣ&RYHU WKH EDWWHU\ ZLWK WDSH EHIRUH GLVSRVDO 7KLV ZLOO SUHYHQW EDWWHU\ IOXLG leakage that may cause fire and / or other damages. Ɣ3ODFH WKH EDWWHU\ RXW RI FKLOGUHQ DQG LQIDQW UHDFK If
Installation and Owner’s Manual ATTENTION To avoid danger from false reset of the thermal breaker, do not supply power through an external switching device, such as a timer, or connect to a circuit that is periodically turned on and off by a general-purpose component. To prevent damage and water leakage, avoid striking the ceramic with force. Do not spray urine on the nozzle. Dirt may cause clogging. Please do not bury cementitious materials (cement mortar, etc.
Installation and Owner’s Manual ATTENTION Unplug the unit when the product is in disuse for a long time. Make sure to shut off the water supply and drain the water inside the product. Risk of fire, leakage and product damage. Do not use old hose to connect to unit. Use the one provided with your product. Anything else connected to the older hose may need replaced. Risk of water leakage and property loss. When storing or transporting in cold climate, make sure to drain the water from the unit.
Installation and Owner’s Manual 4. Product Installation (1) Tools needed Drill (with 6mm Bit) Raw Tape Utility Knife Marker 23-26mm (Adjustable Wrench) Screwdriver Tape Measure Measuring Cup (2) Parts included Smart Toilet T-Valve Wax Ring Remote Control Assembly Operating Instruction and Other Prints Connector Floor Bolts Please verify that all items in the package are present. In case of any missing parts, kindly reach out to our customer service department at (+1) 312-626-9466.
Installation and Owner’s Manual 3. Parts Diagram (1) Smart toilet overall view Safety Instruction Cover Power Plug Dryer Nozzle (Rear Wash and Front Wash) Knob Seat Sensor Toilet Water Supply Hose Heated Seat Tee valve a are on ti on ucti duc ión Ind e d'in ducc Zona de in re Á Toilet Water Supply Angle Valve Foot Touch Intelligent Toilet Water Supply Hose knob Actual product features and appearance prevail over depictions and descriptions.
Installation and Owner’s Manual (2) Remote Control Night Light Hot/Cold Alternates between hot and cold water for washing On/off of night light Nozzle Clean Key for nozzle clean Bidet Bidet For female washing Dryer Drying off the washed area Flush Flushing the toilet after use Water Temp. Adjust the water temperature Posterior For posterior washing Dryer Temp. Adjust the wind temperature Position Adjust the nozzle position in 5 levels Seat Temp.
Installation and Owner’s Manual (3) Precautions before Installation Water Pressure Requirements The minimum dynamic operating water pressure is 25 Psi, and the maximum static water pressure is 80 Psi. 16.65" 25.21" 18.43" 15.35" 16" Rough-in 12" NOTE: Drawings may not exactly define contour of the product. -13- (+1) 312-626-9466 www.deervalleybath.
Installation and Owner’s Manual 4. Install the Smart Toilet (1) Draw a cross marker on the drain outlet on the ground. Clean the floor and wipe off any excess dust or dirt . Failure to install on an cleaned surface will affect the quality of installation. Existing water supply angle valve Grounded waterproof and splashproof electrical outlet. 8" (200mm) Drain outlet Cross marker 12" (305mm) (2) Installation of floor flange. Ground Flange (3) Install smart toilet bottom flange anchor screw.
Installation and Owner’s Manual (4) Install the wax ring and brass floor bolts onto floor flange. Insert the 2 brass floor bolts flat head thru the appropriate slot in the floor flange. Use the provided plastic floor bolt washer to secure the floor bolts on the floor flange. Brass bolts should remain vertical FIGURE 5A. Install the wax ring at the sewage outlet of the product FIGURE 5B. FIGURE 5A FIGURE 5B Floor Bolts Wax Ring Wax Ring Flange (5) Preparing the toilet seat for toilet bowl installation.
Installation and Owner’s Manual (7) Connecting the tee valve to shut off valve and connecting braided water supply hoses. :LWK WKH PDOH FRQQHFWLRQ IDFLQJ WR WKH ULJKW DSSO\ 7HOÀRQ WDSH DQG VFUHZ RQ adapter (supplied). FIGURE 9B FIGURE 9A &RQQHFW WHH YDOYH WR PDOH WKUHDG RQ DGDSWHU DSSO\ 7HOÀRQ WDSH WR PDOH WKUHDGV Connect braided supply tubes to tee valve male connections.
Installation and Owner’s Manual (9) Connect the power supply. Connect the ground wire. Power plug into the AC 120V socket. Confirm whether the power is connected. Note: Check the power plug indicator light. An illuminated power indicator confirms that the smart toilet is on. Once powered on, press and hold the knob for 3 seconds to enter standby mode. NOTE: Drawings may not exactly define contour of the product. -17- (+1) 312-626-9466 www.deervalleybath.
Installation and Owner’s Manual 5. Install the Remote Control (1) Install the Remote Control 1. According to the location of the screw holes of the remote control holder, drill two holes with a 6mm-diameter drill bit on the wall with a depth greater than 45mm. 2. Install the expansion tube into the holes. 3. Place the remote control holder onto the fixing hole. 4. Fix the remote control holder with the configured expansion screws. 5. Open the battery area of the remote control and install new batteries. 6.
Installation and Owner’s Manual (2) Test before use Test run (test all function buttons on the remote control and the knob on toilet body.) ● Verify the normal operation of each product function. Confirm the functionality of rear wash, front wash (including spray strength adjustment and nozzle position adjustment), dryer, air temperature, water temperature, seat temperature, and nozzle clean. Ensure all specified actions are functioning correctly.
Installation and Owner’s Manual 6. Remote Control Operation The product incorporates a seat sensor. If the user is not seated properly, the rear wash, front wash, and dryer functions will not be operable. Bidet Press "Bidet" key. The water flow for washing is directed from the front end of the nozzle, providing a cleansing motion for the intimate areas of females. Press the button again to deactivate the washing motion. Bidet Posterior Press "Posterior" key.
Installation and Owner’s Manual Hot/Cold Press "Hot/Cold" key, and Hot/Cold function will be enabled or disabled. In wash mode, press the Hot/Cold key to alternate between cold and warm water wash. This function is exclusively available during wash mode. Bidet Dryer Press "Dryer" for drying washed part. Press Dryer for drying washed part. When it is switched to warm-air temperature, press “ Dryer Temp.” key, current temperature level will be displayed when the key is pressed for the first time.
Installation and Owner’s Manual 《 Water Temp. Press "Water Temp." key to adjust water temperature for wash. Current temperature level will be displayed when the key is pressed for the first time. When it is pressed again, temperature level will be switched, and proper temperature can be set.
Installation and Owner’s Manual 《 Nozzle Clean Press "Nozzle Clean" key. ●The cleaner protrudes for manual wash. This function is only available when the human body or other objects do not contact the seat ring sensing area. ●While the human body is seated, press the "Nozzle Clean" key to activate/deactivate the wash with air bubbles. This function is exclusive to wash mode. Bidet Night light Press "Night light" key. Night light will be on or off. Position Press "Position" key.
Installation and Owner’s Manual 7. Knob and other operation Posterior Bidet Powered on and seated, with front wash, reash wash and dryer functions off. Powered on and seated, with front wash, reash wash and dryer functions off. Turn the knob counterclockwise for auto front wash with default oscillating function. The entire process will consist of 4 mins front wash + 3 mins dryer+ flushing once while drying.
Installation and Owner’s Manual Deodorization The function will operate automatically. Deodorizing fan automatically turns on after seating and turns off 3 minutes after leaving the seat. Auto flush Human body leaves the seat sensor area after seating. When the human body leaves the seat after seating, it will automatically flush once. Kick to Flush Kick the "foot touch button". To flush the toilet. Do not kick with force or high frequency. NOTE: Drawings may not exactly define contour of the product.
Installation and Owner’s Manual 8. Battery Backup Installation ●Take out the battery box by prying open the clasp on both sides with a screwdriver and removing the battery box cover. ●Align the positive and negative terminals of the battery with those inside the battery box, then install it into the battery box base. Securely cover the battery compartment and lock the clips. ●Connect the battery box's connection cable to the rear of the product and secure it by locking the nut.
Installation and Owner’s Manual 9. Specifications (1) Product specifications Power rating 110V Frequency 60Hz Rated power input 1050W(When inlet water temp in 15ȭ) Seat and dryer temperature range 39.4 °F~104 °F Source water temperature range 39.
Installation and Owner’s Manual (2) Function Table Category Function Posterior (Rear cleaning) Bidet (Front cleaning) Instant heating Cleansing Comfort Human care Safety Oscillating cleaning Hot & cold massage cleaning Water pressure adjustment Water temperature adjustment Nozzle position adjustment Self-cleaning nozzle Antibacterial nozzle & seat cover Instant heating Seat heating Seat ring temperature adjustment Warm wind drying Warm wind temperature adjustment Air-cleaning filter system Soft close
Installation and Owner’s Manual (3) Regular maintenance Regular maintenance is required to ensure normal use Cut off the power and water supply before maintenance. Direct water wash to the entire product is prohibited. WARNING Do not spray water or detergents on the toilet, remote control or the power cord. Doing so may cause electrick shock or fire. During winter season, the water inside may freeze after long periods of storage and non-usage. Please take measures to prevent.
Installation and Owner’s Manual (4) Problems & Solutions B Problems Causes F Problems Causes Check whether the water supply cuts off or not Check whether the angle valve switches off or not Check whether the water filter is blocked or not Check whether the inlet pipe is flexed or not Check whether the water pressure of cleaning switch to low level or not Check whether the inlet filter is blocked or not Check whether the water switches to low level or not The cleansing is always leaking NOTE: Drawings
Installation and Owner’s Manual Problems Causes Check whether the dryer switches off or not Check whether the heating element of dryer is damaged or not S Problems Causes Check whether the temp of toilet seat is on the "off" position or not Problems Check whether there is any water on the remote control or not Problems Inadequate flushing of the product Causes 1.Verify if the pipeline is obstructed. Ensure the water supply pipeline is unobstructed and flowing smoothly. 2.
Phone: (+1) 312-626-9466 Email: service@deervalleybath.com Web: www.deervalleybath.com ONE YEAR LIMITED WARRANTY LIMITED WARRANTY COVERAGE 1 YEAR LIMITED WARRANTY DeerValley products are made with quality materials and excellent craftsmanship to provide the customers a long-lasting product.