Datasheet

www.defa.com
DEFA MiniPlug Power supply cable
DEFA MiniPlug (A) is to be tted into the specially developed DEFA
MiniPlug inlet cable connector who is made to be discrete integrated
in the front of modern streamlined vehicles. (Ref. DEFA MiniPlug inlet
cable product sheets)
The DEFA Power supply cables MiniPlug end(A), is also named DEFA
EcoPlug.
Only use original DEFA MiniPlug connecting cable together with DEFA
MiniPlug inlet cable and connect the DEFA MiniPlug connecting cable
only to an earthed power socket. Fit and install parts according to the
enclosed usage & installation guide.
DEFA AS is conforming to the requirements of both ISO 9001-2008,
ISO 14001:2004 and OHSAS 18001:2007. In addition to this, our
engine heaters and cables are conforming to the requirements of ISO/
TS 16949:2002.
Item no
460920 Weight: 420 gr. (22ex x 2,5m pr. assemby box),
460921 Weight: 695 gr. (12ex x 5,0m pr.assemby box),
460924 Weight: 1180 gr. (1ex x 10,0m pr. assemby box),
460936 Weight: 1700gr. (1ex x 15,0m pr. assemby box).
Part of
DEFA MiniPlug connecting cable 460920 (2,5m) is a part of
DEFA WarmUp and different ComfortKits and cable kits.
(see DEFAs product catalogue or www.defa.com).
Usage
Connect the DEFA EcoPlug (A) to the DEFA MiniPlug inlet cable contact in the front
of your vehicle. Make sure not to harm or damage the DEFA MiniPlug connecting
cable. Ensure not to damage the cable insulation by squeezing the cable under
the hood or in the doorway.
Keep the cap on the DEFA EcoPlug when the cable is not in use.
Maintenance
Disconnect the cable. Apply some silicon spray on the MiniPlug contact terminals
before and after the season and ensure that either the cable or cap is damaged.
PBR 140313 - DEFA Power supply cable
Technical specications
Voltage [V/Hz] 250
Fuse [A] 16
Lenght [m] 2.5, 5.0, 10.0, 15.0
IP rating MiniPlug (A) IP44
Testing & acceptance
EN 50066
EN 60309-1
A