Instructions

6
ENGLISHDEUTSCHFRANCAISESPAÑOLPOLSKIITALIANO
COMPACT COMPACT
DEFENDER
®
COMPACT
The affordable variant of the DEFENDER
®
3 system. The arrangement of supports moulded into the bottom
permits the DEFENDER
®
COMPACT to be laid over numerous cables, supporting the weight of crossing vehicles.
Black polyurethane construction with a ribbed non-slip surface. The ultimate enhancement for heavy loads:
The unique DEFENDER
®
COMPACT base with a weight of 3.6 kg is attached to the DEFENDER
®
COMPACT cable
protector to form a single unit. Thus reinforced, the DEFENDER
®
COMPACT cable protector can withstand even
high loads. Even forklifts and lifting trucks can now drive over this protector without problems. Five cable channels
with a diameter of 22 mm each provide ample space for many applications. If multiple DEFENDER
®
COMPACT cable
protectors with a base are assembled in a line, the row now remains flat as stable row even when driven over by a
car.
This simple cable protector is a so-called "drop over" protector. First you run your cables and then cover them
with the COMPACT. If you have chosen the COMPACT with BASE, first assemble the BASE into a fixed LINE. Now
run your cables on the base before covering both with the COMPACT. The bars of the COMPACT engage in the
BASE and connect both to form a fixed unit. You can make the line more rigid by laying the COMPACT so that it is
offset in relation to the BASE.
COMPACT 810 x 410 x 37 mm Weight: 3.6 kg
Safe load: approx. 2 t on an area of 20 x 20 cm. Not to be used in street traffic. However, automobiles may
still drive slowly over the protector.
Areas of use:
Offices / conference facilities / stage and studio applications / Exhibitions / walkways / marketplaces /
Christmas markets / workshops / warehouses / shopping centers / department stores / etc
85100