Instructions

SERIES

ENGLISHDEUTSCHFRANCAIS

FRANCAISFRANCAIS FRANCAISFRANCAIS

ESPAÑOLPOLSKIITALIANO

DEFENDER CABLE CROSSOVERS

You have chosen the DEFENDER series and thus made the best choice when it comes to protecting your cables.

Although using our cable crossovers is a simple and logical matter, here are a few helpful tips on handling and

using them.

PATENTED WITH SELF-CLEANING HINGE (EU Patent No.: EP1366550) MADE IN GERMANY!

All of our crossovers are made of extremely sturdy, nonbreakable TPU (thermoplastic polyurethane). If necessary,

the crossovers can be cleaned without trouble, even using a steam jet cleaner. In order to ensure trouble-free

functioning, however, the hinge area and the fastener should always be kept clean. Lubricate the hinge and

fastener lightly as needed. For this, we recommend using a commercially available Teﬂon or silicone spray. Wipe

off excess lubricant after application to avoid any risk of slipping.

USE AND LOAD BEARING CAPACITY

Please note that additional markings / hazard warnings or even permits may be required when using cable

crossovers on public thoroughfares, walkways, etc. To ﬁnd the right cable crossover for your respective require-

ments, please see the attached tables for the load bearing capacity.

PREREQUISITE

Please always remember that the respectively speciﬁed safe load is for use on a ﬁrm, level surface. Load bearing

capacity may be greatly reduced on uneven or soft ground. In such cases, you should conduct appropriate load

tests before using the crossover.

FIRE PREVENTION

All DEFENDER cable crossovers are made of polyurethane. They have a B2 ﬁre resistance rating (also available

with a B1 rating – difﬁcult to ignite – in compliance with DIN4102) and are resistant to oil, acids & petrol. The

operating temperature range is approx. -40°C to +70°C. The Shore A hardness range is 88 ± 4.