Instructions

8
SERIES
ENGLISHDEUTSCHFRANCAIS
FRANCAISFRANCAIS FRANCAISFRANCAIS
ESPAÑOLPOLSKIITALIANO
DEFENDER COMPACT
The affordable variant of the Defender III system. The arrangement of supports moulded into the bottom permits
the Defender Compact to be laid over numerous cables, supporting the weight of crossing vehicles. Black
polyurethane construction with a ribbed non-slip surface. The ultimate enhancement for heavy loads: The unique
Defender Compact base with a weight of 3.5 kg is attached to the Defender Compact cable crossover to form a
single unit. Thus reinforced, the Defender Compact cable crossover can withstand even high loads. Even forklifts
and lifting trucks can now drive over this crossover without problems. Five cable channels with a diameter of 22
mm each provide ample space for many applications. If multiple DEFENDER Compact cable crossovers with a
base are assembled in a line, the row now remains flat as stable row even when driven over by a car.
This simple cable protector is a so-called "drop over" crossover. First you run your cables and then cover them
with the COMPACT. If you have chosen the COMPACT with BASE, first assemble the BASE into a fixed LINE. Now
run your cables on the base before covering both with the COMPACT. The bars of the COMPACT engage in the
BASE and connect both to form a fixed unit. You can make the line more rigid by laying the COMPACT so that it is
offset in relation to the BASE.
COMPACT 805 x 435 x 37 mm Weight: 3.5 Kg
Safe load: Pedestrians, bicycle
Range of application: Mainly in halls, at trade fairs, etc.