Operation Guide 2.4GHz Wireless Camera with Detecting Recorder Model No.: 812BF Version No.: 1.
CONTENTS 1. Overview 1 2. Features 1 3. Packing List 2 4. Connection Diagram 3 5. Structure 4 6. Installation 5 7. Receiver Operation 9 8. Specifications 9.
Overview The wireless SDR harddisk recorder is a general harddisk recorder launched for civil security market. Designed with such new technologies as wireless transmission, motion detection, and SD card recording. It is one of the most advanced harddisk recording systems on the market.Provided with such features as high integration, complete auxiliary products, ease of use, high security, and competitive price.
Packing List 2.4GHz Wireless Camera x 1 2.
Structure Camera GP-812T Antenna Infrared Lights Lens Universal Bracket Power Jack -3-
Receiver Antenna Up Button OK Button Down Button Right Button Left Button Menu Button Channel Switch Record Button Channel Indicator Automatic Detection /Recording Indicator Play Button Power Indicator Video In Power Socket Power ON/Off SD Card Slot Video Out -4-
Installation 1. Locate the camera to a specific position and then adjust it to a suitable angle. 2. Connect the adapter to the camera. 3. Connect the antenna to the receiver.
4. Connect the receiver to a monitor/TV with AV cable. AV Cable 5. Connect the adapter for receiver to the receiver. 6. Please insert SD Card to SD Card Slot of receiver.
If the SD Card is inserted incorrectly or is not inserted, the monitor/TV will display SD Card not plug in , and only real-time monitoring is available at this time. Notes : * Make sure the protection switch on SD Card is turned on. * Never touch the metal part of the SD Card with bare hands for static electricity of human body may cause permanent damage to the SD Card. * Insert or pull out the SD Card only when the equipment is turned off. 7.
Press Channel Button continuously, the Channel Indicator lights up.If the Channel Indicator flashes once, the channel is channel 1. If the Channel Indicator flashes twice continuously, the channel is channel 2. If the Channel Indicator flashes three times continuously, the channel is channel 3. If the Channel Indicator flashes four times continuously, the channel is channel 4. Note: The focus of the camera was set clearly as default. 10.
Receiver Operation 1. Menu Key Operation You are recommended to press menu key to set before its first use. Monitor/AV displays picture as follows, Press key to select and press OK key to enter setting. Date/Time set up: Press the and keys to set the date and time of the equipment. Motion Detect ON/OFF set up: Press OK key to change the setting. If you choose ON , the receiver can automatically record or capture photos when motion detected.
Advanced setup: Picture displays as follows, Press key to select and press OK key to enter setting. A B E F C D G A. TV setup: Press OK key to choose PAL or NTSC. B. Quality setup: Press OK key to choose High or Low. High (high quality) is recommended. C. Motion Detect Area setup: Press OK key to enter the detection area modification window, and press the Left or Right key to modify the value. After pressing OK key, the system enters detection location modification windows. D.
2. Shortcut keys on monitoring /Motion Detection Mode Monitor/TV window as following: 20s 2008 / 07 / 24 16 : 08 : 26 :the icon indicates that the SD Card is inserted; : the icon indicates the motion detection function is on, if this function off, the icon will not display. Press Up key to enable/disable automatical motion detection. / :Shooting/Recording mode.Press Down key to switch between shooting and recording mode. Press Left/Right key: setup the record time among 5-30 seconds.
SPECIFICATIONS Items 812BF CMOS 720 480 (NTSC); 720 576(PAL) FM CAMERA Imaging Sensor Total Pixels Modulation Type Transmission Frequency ISM 2,400~2,483MHz Transmission Power 2mW/FCC,10wm/CE 0 Lux Minimum Illumination Night Vision range Bandwidth Power Supply Consumption Current(Max.) 7m 18MHz 8VDC 160mA&250mA 45 78 83 (mm) 217 g 50 ohm SMA Dimensions(W x D x H) Weight(about) Antenna RECEIVER Intermediate Frequency 480MHz ISM 2,400~2,483MHz 1.1Vpp 0.1Vpp@75 ohm, 1.1Vpp 0.
FCC INFORMATION This device complies with part15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment.
