Use and Care Manual

49
NETWORK GUIDE
CONNECTING DVR TO A ROUTER
1. Power o the DVR by removing the power cable from
the back of the DVR.
2. Connect the included network cable to the back of the
DVR in the Ethernet port (LAN).
3. Connect the other end of the network cable to an
available port on the router.
4. Power on the DVR by reconnecting the power cable to
the back of the DVR.
REQUIREMENTS
You will need to have:
 The DVR connected to a router.
 The router connected to the Internet.
 A PC or laptop that is connected to the same router as the DVR. The PC can be
connected by a wired or wireless connection.
 Internet Explorer® (IE) 6.0 or higher (to check your version of Internet Explorer®
open IE. In the top Menu bar select HELP and then select ABOUT INTERNET
EXPLORER®. The version of IE will be displayed).
 A genuine and fully-updated version of Windows XP,® Vista® or newer.
Note: The computer and DVR need to be connected to the same router for initial setup. A computer will
not always be necessary at the location to view the DVR.
LAN Connection
Disclaimer: Internet Explorer is a registered trademark of Microsoft Corporation.
Windows XP is a registered trademark of Microsoft Corporation.
Vista is a registered trademark of Microsoft Corporation.