Use and Care Manual

39
DST (Daylight Saving Time)
You can program the DVR to automatically switch to Daylight Saving Time.
To customize the DVR’s DAYLIGHT SAVING TIME settings:
1. Select the the DST SETUP box next to DST.
2. Select the drop down box next to Daylight Saving Time and list will appear. Select ENABLE.
3. Select the drop down box next to TIME OFFSET and select if you would like your clock to go
forwards or backwards by 1 hour or 2 hours.
4. Select the drop down box next to DAYLIGHT SAVING TIME Mode to adjust whether you would
like DST to change in a specic week or a specic date.
By Week
• Select the drop down box next to DAYLIGHT SAVING TIME MODE and select WEEK.
• Select the drop down box next to Start Time and select the month.
• Select the drop down box below and select the week.
• Select the drop down box below and select the weekday.
• Select the box below and input the time for DST to take eect. Select the ENTER key.
• Repeat steps above for End Time.
By Date
• Select the drop down box next to DAYLIGHT SAVING TIME MODE and select DATE.
• Select the box next to Start Time and a keyboard will appear. Input the specic date.
• Select the box below and input the time for DST to take eect. Select the ENTER key.
• Repeat steps above for End Time.
5. Once your parameters have been set, select APPLY to save your settings.
DST Options
MAIN MENU