Installation Guide

Visit www.DEFENDER-USA.COM/SUPPORT to get additional help from the full product manual and support videos
1. ADMIN PASSWORD
• Create your DVR password (the system does not have a
default password it must be created) – REMEMBER YOUR
PASSWORD!
• Conrm the password.
• Create an IP Camera Activation code (this is only to complete
this screen – IP cameras are not available from Defender for
the 4K system).
• Make sure the Security Question checkbox is enabled.
2. SECURITY QUESTIONS
• Select 3 Questions and enter your Answers.
• Security Questions can be used to access your system if you
forget your password.
3. GUID EXPORT
• Use the export option to save your Password and Security
Questions to a USB Flash Drive. These settings can be imported
later if you Forgot Password and Import GUID.
• Insert your USB Flash Drive in the DVR and click Yes.
• Device Name should be the name of the USB.
• Select the le type *.bin.
• Click Export to copy the Security Settings to the USB Flash Drive.
4. UNLOCK PATTERN
• Draw an Unlock Pattern to access your system instead of
entering the password.
• Click & Drag to draw the pattern – you must connect at least
4 dots.
WARNING : DO NOT RIGHT CLICK ON THE SCREEN BECAUSE YOU
WILL BE UNABLE TO COMPLETE THE SECURITY QUESTIONS.
DVR ACTIVATION
Activation