Defender 4K Product Manual

11
7.2 DVR SETUP
We recommend testing all components and accessories before installing. See section 19 CAMERA
INSTALLATION for details after testing. You will need a monitor/TV with an HDMI or VGA connection
(not included).  4K resolution will show only on a 4K monitor/TV. All other monitor/TV types will
display the image in the available resolution.
Before you start:
• You will need a USB flash drive (not included) to save your login & password details during
Activation.
• Ensure all components are included in your kit.
• Ensure you have enough power outlets for the monitor/TV, cameras (while testing), and the DVR
unit.
• Setup the DVR near your modem/router – you will need to connect your DVR unit to your
modem/router using the Ethernet cable provided.
 Connections may vary by model
All cables and wires are labeled and color coded to the DVR unit to make connecting your system easier.
1. Connect the monitor/TV, USB mouse, cameras, modem/router, and power to the DVR.
Connect the BMC (YELLOW) connector to the camera and the DVR. Connect the power (RED)
connector to the camera and power source.
Connect the HDMI (AQUA) cable to the DVR and monitor/TV (not included).
Connect the USB mouse (GREEN) to the DVR.
Connect the Ethernet cable (PURPLE) to the RJ45 port on the DVR and your modem/router.
 Wired Ethernet connection required – DVR cannot connect to the modem/router via Wi-Fi.
Connect the DVR power adapter to the DVR and a power source.
Turn the DVR power switch ON. Turn on the monitor/TV (not included).
2. Follow the Activation and Setup Wizard to setup the DVR. See section 8 START UP for details.
CONTENTS