Defender 4K Product Manual
Table Of Contents
- 1 THANK YOU
- 2 WARRANTY INFORMATION
- 3 DISCLAIMERS
- 4 SAFETY WARNINGS
- 5 COMPLIANCE STATEMENTS
- 6 WHATS INCLUDED
- 7 GETTING STARTED
- 8 START UP
- 9 USING YOUR SYSTEM
- 10 PLAYBACK
- 11 EXPORT
- 12 VIDEO RECORD SETTINGS
- 13 CAMERA SETTINGS
- 14 CONFIGURATION
- 15 MANUAL CAMERA SETTINGS
- 16 HDD SETTINGS
- 17 SYSTEM MAINTENANCE
- 18 ANALYTICS (IP CAMERA REQUIRED)
- 19 CAMERA INSTALLATION
- 20 HARD DRIVE INSTALLATION
17
8.2 SETUP WIZARD
The Setup Wizard will take you through a series of basic setup screens to get you started. Once the system
is setup, you can access the Defender 4K Menu from the Live View screen to customize your system and
recording settings.
SIGNAL INPUT STATUS
Select the input type for each channel on the DVR.
This is the type of camera that can be connected to
each channel port.
IP cameras are not available
from Defender for the 4K system.
STEPS:
• Make sure that HD/CVBS is select for each
channel.
• Click Apply to save your selections and to move
to the next screen.
LANGUAGE
Your system supports multiple languages.
STEPS:
• Click the System Language drop-down and
select your desired language.
• Click Apply to save your selection and to move
to the next screen.
WIZARD ACCESS
You can choose to have the Setup Wizard appear each
time the DVR is powered on. This will enable you to
review and/or change these settings on start up.
STEPS:
• Click to select the Start wizard when device
start? checkbox to have the Setup Wizard show
each time the system is turned on. Uncheck the
box to disable this.
• Click Next to save your selection and to move to
the next screen.
CONTENTS