Defender 4K Product Manual

22
Playback the last 5 minutes of recorded footage. The progress bar will appear
allowing you to move through the footage, pause/re-start playback.
Volume Controls  Defender systems do not support audio recording.
PTZ

PTZ Cameras are not available from Defender for the 4K system.
Zoom IN/OUT.
Open the Image Setting Window (click and drag the slide bars to change the
settings).
VCA Info (click to Show/Hide the VCA settings applied to the selected camera).
Close the Toolbar.
•
The other 2 icons on the Toolbar are not available on the Defender 4K
system
• Double click the mouse (left button) to switch between single (camera in
full screen) and multiple camera views.
• Use the scroll wheel on the mouse to view previous (up) cameras or next
(down) cameras.

This will move through all cameras connected to the
DVR when not viewing all.
• Click and Drag a camera view to move it to a different location on the
screen.
Exceptions: Shows when an Exception is reported. Exceptions are setup in
DEFENDER 4K MENU > CONFIGURATION > EXCEPTIONS. When enabled and an
event occurs the icon will appear on the screen. Click the icon to view the details.
Alarm:
Shows when there is an Alarm setup on the camera.
Recording: Shows when footage is being recorded on the camera. (example: you have
set the camera to Motion Detection recording and motion is detected by the camera).
View Window: Depending on the number of cameras connected and the Multi-screen
option selected the live view image of the camera will appear on the screen.
Right Click Menu:
Click the mouse (right button) to open the menu.
CONTENTS