Defender 4K Product Manual
Table Of Contents
- 1 THANK YOU
- 2 WARRANTY INFORMATION
- 3 DISCLAIMERS
- 4 SAFETY WARNINGS
- 5 COMPLIANCE STATEMENTS
- 6 WHATS INCLUDED
- 7 GETTING STARTED
- 8 START UP
- 9 USING YOUR SYSTEM
- 10 PLAYBACK
- 11 EXPORT
- 12 VIDEO RECORD SETTINGS
- 13 CAMERA SETTINGS
- 14 CONFIGURATION
- 15 MANUAL CAMERA SETTINGS
- 16 HDD SETTINGS
- 17 SYSTEM MAINTENANCE
- 18 ANALYTICS (IP CAMERA REQUIRED)
- 19 CAMERA INSTALLATION
- 20 HARD DRIVE INSTALLATION
40
12.3 ADVANCED
RIGHT CLICK MENU > DEFENDER 4K MENU > VIDEO SETTINGS
The advanced setting allows you to select the correct action when the hard drive is full.
Click the Overwrite checkbox to enable the DVR to record over the oldest footage when the disk is full.
If not selected the DVR will stop recording when the hard drive is full and will report HDD Full as an event
based on your exception settings. See section 14.4 EXCEPTIONS
for details.
12.4 HOLIDAY
RIGHT CLICK MENU > DEFENDER 4K MENU > VIDEO SETTINGS
You can setup breaks in the recording schedule using the Holiday function. When a holiday is setup the
system will stop recording during the dates/times entered and will resume when the holiday is over.
Holidays will override the regular Schedule setup.
1. Select a Holiday from the list and click the Edit checkbox.
2. Click the Enable checkbox to apply the holiday to the schedule.
3. Use the Mode drop-down to select how often the holiday will repeat.
4. Use the Start/End Date drop-downs to select the holiday date range.
5. Click Apply to save the new settings.
6. Click OK to exit the Edit screen.
CONTENTS