Defender 4K Product Manual

41
13 CAMERA SETTINGS
13.1 CAMERA
 RIGHT CLICK MENU > DEFENDER 4K MENU > CAMERA SETTINGS
Signal Input Status is used to choose the allowable input type for each channel on the DVR. This is the
type of camera that can be added to each channel port. This should only be HD/CVBS for all channels
because IP cameras are not currently available from Defender for the 4K system. This screen is part
of the Setup Wizard.
13.2 OSD (ON-SCREEN DISPLAY)
 RIGHT CLICK MENU > DEFENDER 4K MENU > CAMERA SETTINGS
These settings allow you to adjust the on-screen display for each camera including what will be displayed,
camera names, and formats. Change made will appear in the preview window on this screen.
1. Use the Camera drop-down to select a camera to adjust.
2. Click the Camera Name field to enter a new name. Giving the camera a descriptive name will
make it easier when selecting the camera (example: driveway, front entrance, etc).
3. Click the Display Name checkbox to have the name appear.
4. Click the Display Date checkbox to have the date appear.
5. Click the Week checkbox to have the week appear.
6. Use the Date Format drop-down to select how the date will appear.
7. Use the Time Format drop-down to select the type of clock (12 or 24 hour).
8. Use the Display Mode drop-down to select the appearance type (how the on-screen display will
show on the screen). Choose if the OSD should flash and/or be transparent on the screen.
9. Use the OSD Font drop-down to select the size of the font.
10. Click Apply to save these settings to the current camera.
11. Click Copy to apply these settings to other cameras. If you have entered a name for this camera
it will also be copied to the other camera(s).
CONTENTS