Defender 4K Product Manual
Table Of Contents
- 1 THANK YOU
- 2 WARRANTY INFORMATION
- 3 DISCLAIMERS
- 4 SAFETY WARNINGS
- 5 COMPLIANCE STATEMENTS
- 6 WHATS INCLUDED
- 7 GETTING STARTED
- 8 START UP
- 9 USING YOUR SYSTEM
- 10 PLAYBACK
- 11 EXPORT
- 12 VIDEO RECORD SETTINGS
- 13 CAMERA SETTINGS
- 14 CONFIGURATION
- 15 MANUAL CAMERA SETTINGS
- 16 HDD SETTINGS
- 17 SYSTEM MAINTENANCE
- 18 ANALYTICS (IP CAMERA REQUIRED)
- 19 CAMERA INSTALLATION
- 20 HARD DRIVE INSTALLATION
45
13.5 PRIVACY MASK
RIGHT CLICK MENU > DEFENDER 4K MENU > CAMERA SETTINGS
This section allows you to set areas that will not be recorded.
1. Use the Camera drop-down to select a camera.
2. Click the Enable Privacy Mask checkbox to allow for privacy areas to be applied.
3. Click and drag the mouse within the preview window to set the areas that will not be recorded.
You can set up to 4 areas for each camera. Areas that are blocked out will not be recorded.
4. Click the Clear All or Clear Zone 1-4 buttons to remove areas that have been set.
5. Click Apply to save these settings.
6. Use the Copy function to apply these settings to other cameras. The privacy areas may not be
the same on all cameras.
CONTENTS