Defender 4K Product Manual
Table Of Contents
- 1 THANK YOU
- 2 WARRANTY INFORMATION
- 3 DISCLAIMERS
- 4 SAFETY WARNINGS
- 5 COMPLIANCE STATEMENTS
- 6 WHATS INCLUDED
- 7 GETTING STARTED
- 8 START UP
- 9 USING YOUR SYSTEM
- 10 PLAYBACK
- 11 EXPORT
- 12 VIDEO RECORD SETTINGS
- 13 CAMERA SETTINGS
- 14 CONFIGURATION
- 15 MANUAL CAMERA SETTINGS
- 16 HDD SETTINGS
- 17 SYSTEM MAINTENANCE
- 18 ANALYTICS (IP CAMERA REQUIRED)
- 19 CAMERA INSTALLATION
- 20 HARD DRIVE INSTALLATION
49
13.9 VIDEO QUALITY DIAGNOSTICS
RIGHT CLICK MENU > DEFENDER 4K MENU > CAMERA SETTINGS
This section allows you to set parameters for the quality of the video from each camera. When a
diagnostic is run on the camera these parameters will be used to determine quality issues.
1. Use the Camera drop-down to select a camera.
2. Click the Enable Video Quality Diagnostics checkbox to all for diagnostics on the camera.
3. Click Settings to set the date/time and action for the diagnostics to run and action for the results:
Arming Schedule
A. Use the Week drop-down to select when the diagnostics will run.
B. Use the Time icon to set a time for running the diagnostics. It is recommended to run this
during the day.
C. Use the Copy function to apply these settings to other days of the week or everyday.
D. Click Apply to save these settings.
Linkage Action
A. Click the checkboxes to assign an Action for the results.
B. Click Apply to save these settings.
4. Use the slide bar or up/down arrows to assign a Threshold for acceptable quality on the camera
view.
5. Click Apply to save these settings.
6. Use the Copy function to apply these setting to other cameras. The video quality may be
different for each camera depending on the location.
CONTENTS