Defender 4K Product Manual
Table Of Contents
- 1 THANK YOU
- 2 WARRANTY INFORMATION
- 3 DISCLAIMERS
- 4 SAFETY WARNINGS
- 5 COMPLIANCE STATEMENTS
- 6 WHATS INCLUDED
- 7 GETTING STARTED
- 8 START UP
- 9 USING YOUR SYSTEM
- 10 PLAYBACK
- 11 EXPORT
- 12 VIDEO RECORD SETTINGS
- 13 CAMERA SETTINGS
- 14 CONFIGURATION
- 15 MANUAL CAMERA SETTINGS
- 16 HDD SETTINGS
- 17 SYSTEM MAINTENANCE
- 18 ANALYTICS (IP CAMERA REQUIRED)
- 19 CAMERA INSTALLATION
- 20 HARD DRIVE INSTALLATION
50
14 CONFIGURATION
14.1 GENERAL
RIGHT CLICK MENU > DEFENDER 4K MENU > CONFIGURATION
14.1.1 General Settings
Some of the settings on this screen where set in the Setup Wizard. You can change these settings
from this screen.
1. Use the Language drop-down to change the language of the menus and screens.
2. Use the VGA/HDMI Resolution drop-down to change the resolution of the monitor/TV
being used. The DVR will automatically set the resolution. This setting does not need to be
changed.
3. Use the Time Zone drop-down to change.
4. Use the Date Format drop-down to change the format for how the date is displayed on the
screen and in recorded footage.
5. Use the calendar icon to change the System Date.
6. Use the time icon to change the System Time.
7. Use the slide bar to adjust the speed of the Mouse Pointer. As you move the slide bar
the mouse response will change on the screen.
8. Click the Enable Wizard checkbox to have the Setup Wizard launch each time the DVR is
powered on.
9. Click the Enable Password checkbox to have the password required when the DVR screen
locks after a period of inactivity.
10. Click to Apply to save these settings.
CONTENTS