Defender 4K Product Manual

52
14.1.3 More Settings
1. Click the Device Name field to change the name of the DVR or leave it as the default. The
Device No. is the internal device number of the DVR.
2. Use the Auto Logout drop-down to select the number of minutes before the DVR locks out
the menu functions showing only the Live View screen.
 The DVR will require either the
password or unlock pattern to re-open the menu once it has locked.
3. Use the Menu Output Mode drop-down if you have more than one display connected to
the DVR to select which display will show the Menu and Toolbar (VGA or HDMI).
4. Click Apply to save these settings.
14.2 NETWORK
 RIGHT CLICK MENU > DEFENDER 4K MENU > CONFIGURATION
GENERAL
This section is covered in the Setup Wizard section. The settings on this screen do not need to be changed
they are automatically assigned by your network when the Enable DHCP checkbox is selected and the
NIC Type default should not be changed for regular use of the DVR.
APP ACCESS
This section is covered in the Setup Wizard section. The Enable checkbox must be selected for the Mobile
App connection to work. You can change the Verification Code from this screen if needed. The Verification
Code is required when setting up a Mobile App Account.
PPPOE
This is an advanced setting. Contact your Internet service provider for details about PPPOE services.
DDNS
Enable the DDNS service to view your DVR from a computer. Contact your Internet service provider to
setup.
NTP
Allows you to setup your DVR to obtain the current date and time from our network. The Enable NTP
checkbox needs to be selected to allow the DVR to be updated. Interval (min) is the number of minutes
that will elapse for the internal clock on the DVR to update to match the NTP server – 60 minutes is
recommended.
CONTENTS