Defender 4K Product Manual

54
10. Click the Enable Attached Picture checkbox to allow the DVR to send a small image for
each alert (this will attach for recorded footage notification only).
 If the email is related
to a motion alert the image will be of the object that triggered the alert only).
11. Use the Interval drop-down to select the amount time that needs to pass after sending an
email before another email can be sent.
12. Click Test to send an email to the receivers.
13. Click Apply to save these settings.
14.3 LIVE VIEW
 RIGHT CLICK MENU > DEFENDER 4K MENU > CONFIGURATION
14.3.1 General
1. The Video Output default is VGA/HDM and does not need to be changed.
2. Use the Live View Mode drop-down to select a default screen view (number and positioning of
cameras shown on the screen).
3. Use the Dwell Time drop-down to select the number of seconds a video will stay on the screen
before switching to the next camera.
This setting is required before Auto-switch can be selected
from the Right Click Menu.
4. Audio Output and Volume are not supported on the Defender 4K system.
5. The Event Output default is VGA/HDMI and does not need to be changed.
6. Use the Full Screen Monitoring Dwell Time drop-down to select the amount of time the alarm
event window will be displayed.
7. Click Apply to save these settings.
CONTENTS