Defender 4K Product Manual
Table Of Contents
- 1 THANK YOU
- 2 WARRANTY INFORMATION
- 3 DISCLAIMERS
- 4 SAFETY WARNINGS
- 5 COMPLIANCE STATEMENTS
- 6 WHATS INCLUDED
- 7 GETTING STARTED
- 8 START UP
- 9 USING YOUR SYSTEM
- 10 PLAYBACK
- 11 EXPORT
- 12 VIDEO RECORD SETTINGS
- 13 CAMERA SETTINGS
- 14 CONFIGURATION
- 15 MANUAL CAMERA SETTINGS
- 16 HDD SETTINGS
- 17 SYSTEM MAINTENANCE
- 18 ANALYTICS (IP CAMERA REQUIRED)
- 19 CAMERA INSTALLATION
- 20 HARD DRIVE INSTALLATION
61
16.2 ADVANCED
RIGHT CLICK MENU > DEFENDER 4K MENU > HDD SETTING
1. Use the Mode drop-down to select:
• Quota – Configure each camera to have a maximum quota for storage of recorded files or
picture capture. This will limit the amount of hard drive space the camera is allowed to use.
Leave the Max. fields at 0 to allow each camera to share the available space on the hard
drive.
• Group – If you have multiple HDD installed they can be managed in groups. Video from
selected cameras can be recorded to a specific HDD through these settings.
2. Use the Camera drop-down to select.
3. When using Quota, you can change the Max. Record Capacity (GB) and Max. Picture Capacity
(GB) for each camera – the default is 0 which means all cameras will share the total capacity of the
hard drive.
4. Click the Enable HDD Sleeping to switch the status and reduce the storage consumption when
there is no need to read or write to the HDD.
5. Click Apply to save your settings.
6. You can select Copy to apply these setting to other cameras.
CONTENTS