Defender 4K Product Manual

70
19 CAMERA INSTALLATION
• We recommend testing all cameras before installing them to ensure all components work properly.
• Determine all areas you want to cover and plan out where each camera should be installed.
• Make sure there is access to power outlets where the cameras will be installed.
• Place the cameras up high to ensure the camera view covers the maximum area.
• Make sure there are no objects obstructing the camera view area.
• Do not place cameras where light will shine in the view lens – this will obstruct your view and the
recorded footage.
• Protect camera cables – install in a place where the wires can be hidden.
• Place cameras under shelter to reduce the amount of rain or snow on the lens.
• Place cameras where they will can be seen – this may deter potential intruders.
Before you start – you will need:
• Drill
• Screwdriver (Phillips #2)
• Ladder (as required)
• Cable Protectors (as required)
STEPS:
1. Place the camera in the location and mark the holes using the drilling template included in the camera
box
2. Install the camera using the hardware provided and ensure that it is secure against the surface (not
hanging down)
3. Connect the BNC cable and power adapter to the camera. Connect the ends and twist to secure. 
Hide the cable so they cannot be seen or easily accessed.
4. Connect the power adapter or power splitter to a power outlet/source.
5. Connect the other end of the BNC cable to the DVR unit. Connect the ends and twist to secure.
CONTENTS