User manual

ST300-SD

Set Motion Detection

Adjusting the motion detection area is a convenient feature for you to customize your cover recording

experience. This option allows you to eliminate unwanted items that would trigger motion recording, for

example, a fan or television screen, allowing you to record only what is important to you.

To adjust motion detection area:

Change the edit mode by pressing the “PLAY” button on the ST300. Navigate the screen moving up, down, left

and right then select by pressing the joystick. A red square indicates that motion will not be detected while a

white square indicates that it will.

Cell Edit: Choose a single area to turn on or o motion activated recording

Add Block: Select the areas of the camera you don’t want motion recording

Add All: This prevents motion recording for the entirety of the whole screen

Delete Block: Toggle an area where you want motion detection recording

Delete All: This sets motion recording for the entirety of the whole screen

Motion Detection Sensitivity

MD Energy

Gauges how much motion is detected on screen so you can set your desired sensitivity level with the Motion

Detection Threshold.

Motion Detection Threshold

Alter the degree of motion required to trigger motion activated recording. By decresing the reshold, the motion

detection becomes more sensitive. Likewise, increasing the threshold desensitizes motion detection.

Set Motion Detection Area

Motion Detection Sensitivy Menu

DVR SETTINGS