User manual

ST300-SD

Factory Default

This option allows you to set your ST300 back to its factory default settings, precisely

the way the unit came out of the box.

CAMERA SPECIFICATIONS

Image Sensor 1/6" Color CMOS Sensor

Resolution 640 x 480

Outdoor Use No

Focal Length Board Lens f3.62mm / F2.8

Focus Type Fixed

Min. Illumination 2 lux

System Status Menu

Motion Detection Yes

Viewing Angle 66 Degrees

BLC Auto

AGC Auto

White Balance Auto

Signal Noise 46 dB

To set factory default:

1. Select the factory default option from the main menu. You will be prompted:

“RECALL DEFAULT NOW?”

2. To restore your ST300 to factory default press the joystick button to signal yes.

3. To cancel resetting your ST300 to factory defaults, press the “STOP” button to cancel.

DVR SETTINGS