MSDS

MATERIAL SAFETY DATA SHEET Revised: 8/02

PRODUCT: ALTO

Fluorescent Lamp – Advantage (F32 T8/TL 830, 835, 841, 850)

SECTION 1: MANUFACTURER

Manufacturer's Name and Address: Philips Lighting Company

A Division of Philips Electronics

North America Corporation

200 Franklin Square Drive

Somerset, New Jersey 08875

Emergency Telephone No.: (800) 424-9300 CHEMTREC

(732) 563-3197 Safety and Compliance

Other Information Calls: (800) PLC BULB

SECTION 2: HAZARDOUS INGREDIENTS

OSHA (PEL) ACGIH (TLV) % by Wt.

mg/m

TWA

Inert Ingredients (glass, wire, aluminum) approx. 97.5

Phosphor powder & 15 mg/m

10mg/m

Less than 2.0

as nuisance dust

Aluminum Oxide (1344-28-1) 10mg/m

approx. .5

Barium Magnesium Aluminate None Est'd max. .1

Yttrium Oxide (68585-82-0) 1.0 mg/m

l.0 mg/m

max. .9

Lanthanum Phosphate (95823-34-0) None Est'd max. .6

Mercury (7439-97-6) .10 mg/m

.025 mg/m

Less than 20 ppm

PAGE 1
MATERIAL SAFETY DATA SHEET Revised: 8/02 PRODUCT: ALTOTM Fluorescent Lamp – Advantage (F32 T8/TL 830, 835, 841, 850) SECTION 1: MANUFACTURER Manufacturer's Name and Address: Philips Lighting Company A Division of Philips Electronics North America Corporation 200 Franklin Square Drive Somerset, New Jersey 08875 Emergency Telephone No.
PAGE 2
ALTOTM Fluorescent Lamp – Advantage (F32 T8/TL 830, 835, 841, 850) Page 2 of 3 SECTION 3: CHEMICAL/PHYSICAL DATA Not Applicable: This item is a light bulb. The bulb is glass; the base is a coated aluminum. The coating is inert. SECTION 4: FIRE AND EXPLOSION DATA FIRE AND EXPLOSION DATA NOT APPLICABLE -- under extreme heat, glass envelope might melt or crack. SECTION 5: REACTIVITY DATA Stability: Lamp is stable. Polymerization: Not applicable. Incompatibility: Glass will react with Hydrofluoric Acid.
PAGE 3
ALTOTM Fluorescent Lamp – Advantage (F32 T8/TL 830, 835, 841, 850) Page 3 of 3 SECTION 7: PRECAUTIONS FOR SAFE HANDLING AND USAGE Normal precautions should be taken for the collection of broken glass. Waste Disposal Method: At the end of rated life, when this lamp is removed from service, it will be subjected to the current Toxic Characteristic Leaching Procedure (TCLP) prescribed by the Environmental Protection Agency.