Full Product Manual

STANDARD QUALITY STREAM

Standard Quality Stream is a second video stream that runs at a lower quality in order to preserve bandwidth

and reduce data consumption when viewing remotely.

Channel: Edit the Standard Quality Stream settings for the selected channel.

FPS (Frames Per Second): The frames per second.

Bitrate Control: The number of bits that are conveyed or processed per unit of time. Set the Bitrate to a

Variable Bitrate, or a Controlled Bitrate.

• CBR (Controlled Bitrate): Cap the amount of data transferred between the DVR and your remote viewing

device.

• VBR (Variable Bitrate): Allow a variable amount of data within each setting. The options are:

• Good

• Better

• Best

Bitrate Mode: Set the bitrate options to Predefined, or to User Defined.

• Predefined: The bitrate is determined by the DVR.

• User Defined: The user can define the bitrate to the parameters they wish to set.

Bitrate: Based on the selected Control and Mode options, select the bitrate. If you have selected User

Defined, you can enter any bitrate between 1024-6144 Kbps.

Audio: Select to Enable/Disable Audio recording for the selected channel. (4 and 8 channel DVRs will have

one audio connection; 16 channel DVRs will have four audio connections). You must have a microphone, or

audio enabled camera, for this feature.

Copy CH1 to All: Copy these settings to all channels.

Default: Restore the settings on this page back to default settings.

Save: Save the settings made on that page.

Cancel: Revert any changes, and exit the menu.

NOTE:

The higher the resolution and FPS settings, the more bandwidth the live stream will use.