Instruction manual

PX301

THINGS TO CONSIDER BEFORE INSTALLATION

• The camera should be installed between 8 to 13ft above the area to be monitored

• Ensure that the camera is installed NO MORE then 100 ft away from the receiver’s position to maintain a strong

signal between the camera and receiver

• Before mounting the camera, ensure there are no obstructions in the camera’s view

• Place camera in the most strategic place where it can provide detailed video of your home or business. Having

the camera in the open for people to see can help deter criminals

• To cover large, dark areas such as backyards, garages, and driveways, place camera in a strategic location, such

as on the roof or deck. This way more area is covered by the camera

• Ensure that the camera is positioned to avoid glare. Be sure to position camera away from direct sunlight or

indoor lighting

• For best results, light in front of the camera should be about the same brightness as the light around the area or

object being monitored

• Decide whether the camera will be wall-mounted, or mounted on a desk/table top. We recommend that the

mount is secured using the included screws and hardware for all installations

The PX301 utilizes clear signal technology,

meaning that it is designed to avoid the

frequencies of common wireless devices. By

doing so, the system does not receive interference

from any standardized 2.4GHz or 5.8 GHz wireless

devices within your home or business.

The signal also passes easily through interior

walls. However, buildings with metal frames or

placing the camera near large metal objects may

cause signal interference. If reception is poor,

moving the camera and/or receiver closer to one

another may x this problem. Interference is also

possible if another device within the building

(such as a cordless phone) is operating on the

same frequency.

AVOIDING INTERFERENCE

INSTALLATION