Instruction manual

SN503-8CH
11
USING THE MOUSE
The included USB mouse makes using the SN503-8CH quick and easy.
The mouse functions just like a mouse for a computer - it allows you
to click on items to select and change them. To get the most out of
your SN503-8CH, we recommend using the mouse.
BASIC SETUP
GETTING STARTED
The SN503-8CH is designed to be user friendly - you will notice the iMenu bubbles located toward the bottom of your
screen which will describe your menu options.
SCREEN VIEWING
By double clicking one of the eight camera screens, the viewing mode will switch to full screen mode. Double clicking
again will bring you back to quad or eight screen mode (pending on what was set before).
Full Screen
Quad Screen
Eight Camera Screen
1. Insert the power cord into the power supply.
2. Plug the power cord into a power outlet (surge
protected power outlet recommended).
3. Insert the power supply wire into the DC 12V port on
the left side of the LCD-DVR.
4. There is a power on/o switch located on the left side
of the SN503-8CH, press this down to turn on your
security system. After a few moments, your DVR
system will immediately begin recording!
Connect to a power source to turn on DVR
POWERING ON YOUR LCD-DVR
Note: Ensure that the mouse is connected to the designated
USB port before powering on