Instruction manual

SN503-8CH

SHORTCUT MENU

Start Record

• Selecting this prompts the LCD-DVR to begin manual recording (if it is not already recording). Selecting this

will override any set recording schedule

Stop Record

• Selecting this prompts the LCD-DVR to stop manual recording

Start Cruise

• Selecting this option prompts the PTZ cruise to start (if you have congured a compatible PTZ camera).

Selecting the cruise option again will stop the PTZ cruise

Start Auto Sequencing

• Selecting this option prompts the cameras to sequence through each camera displayed on full screen. This

function will only work if you have more than one camera connected. Double click the screen to stop the

automatic sequencing. For more information, please see Camera Sequence on page 19

PIP Mode

Picture-in-picture (PIP) allows you to view one camera in full

screen and up to two other channels (of your choice) in smaller

windows on the bottom corners of your screen. You must have

at least two cameras connected to your LCD-DVR to utilize PIP

Mode.

Operating PIP Mode:

1. Scroll to “PIP Mode,” once highlighted, two options will

appear: “1 X 1” and “1 X 2.”

2. Selecting “1 X 1” will display a second channel in the

bottom-left corner of the screen, while “1 x 2” will display

a second and third channel on the two bottom-left and

right corners of the screen.

3. To select which camera you are viewing in the picture-in-

picture, left click the smaller image to cycle through to the

desired channel.

4. To exit “PIP Mode,” right click the mouse.

PIP Mode 1x1

PIP Mode 1x2